The PGA309 is a programmable analog signal conditioner designed for bridge sensors. The analog signal path amplifies the sensor signal and provides digital calibration for zero, span, zero drift, span drift, and sensor linearization errors with applied stress (pressure, strain, etc.). The calibration is done via a One-Wire digital serial interface or through.
1
•2 Complete Bridge Sensor Conditioner
• Voltage Output: Ratiometric or Absolute
• Digital Cal: No Potentiometers/Sensor Trims
• Sensor Error Compensation
– Span, Offset, and Temperature Drifts
• Low Error, Time-Stable
• Sensor Linearization Circuitry
• Temperature Sense: Internal or External
• Calibration Lookup Table Logic
– Uses External EEPROM (SOT23-5)
• Over/Under-Scale Limiting
• Sensor Fault Detection
• +2.7V TO +5.5V Operation
•
–40°C to +125°C Operation
• Small TSSOP-16 Package
APPLICATIONS
• Bridge Sensors
• Remote 4-20mA Transmitters
• Strain, Load, and Weigh Scales
• Automotive S.
The PGA309 is a programmable analog signal conditioner designed for bridge sensors. The analog signal path amplifies the.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PGA300 |
Texas Instruments |
Signal Conditioner/Transmitter | |
2 | PGA305 |
Texas Instruments |
Signal Conditioner/Transmitter | |
3 | PGA308 |
Texas Instruments |
Auto-Zero Sensor Amplifier | |
4 | PGA308-Q1 |
Texas Instruments |
Auto-Zero Sensor Amplifier | |
5 | PGA309-HT |
Texas Instruments |
Programmable Sensor Conditioner | |
6 | PGA331-Q1 |
ETCTI |
PGA331-Q1 Pressure Sensor Signal Conditioner | |
7 | PGA-103+ |
Mini-Circuits |
Ultra Linear Low Noise | |
8 | PGA-132xxx |
Framatome Connectors International |
Floating Pin SMT Header and Sockets | |
9 | PGA-133xxx |
Framatome Connectors International |
Floating Pin SMT Header and Sockets | |
10 | PGA-181xxxx |
Framatome Connectors International |
Floating Pin SMT Header and Sockets | |
11 | PGA100 |
Maxim Integrated Products |
Programmable Gain Amplifier | |
12 | PGA100 |
Burr-Brown |
Operational Amplifiers |