The PEB 8038 is a half-bridge power module featuring two Silicon Carbide (SiC) MOSFETs. It is designed for use as a building block for power electronic converters. Direct access to the gating signals is offered using optical fiber inputs, while galvanically-isolated on-board sensors provide analog measurements related to the DC voltage and the AC output curr.
AND SPECIFICATIONS
» Half-bridge topology (SiC phase-leg) » Embedded 600 µF DC bus » On-board voltage and current sensors » Over voltage/current/temperature protections » 1200 V / 103 A SiC MOSFETs » 800 V nominal DC bus voltage » 38 A continuous RMS current at 20 kHz » 20 mΩ typical RDS(on) » Speed-regulated cooling (140 W TDP) » 100 x 332 mm Eurocard form factor
SIMILAR PRODUCTS
Other types of half-bridge modules are available from imperix, with different voltage and current ratings as well as different semiconductor technologies: » PEB 8024
– 800 V / 24 A
– Faster switching » PEB 4050
– 40.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PEB8024 |
imperix |
Half-bridge SiC power-module | |
2 | PEB-2770 |
Portwell |
Embedded System Board Manual | |
3 | PEB-2780 |
Portwell |
Embedded System Board Manual | |
4 | PEB1756E |
Exar Corporation |
16 STS-48/STM-16 MUX/DEMUX | |
5 | PEB1757E |
Exar Corporation |
4192 QUAD STS-192/STM-64 MUX/DEMUX | |
6 | PEB2023 |
Siemens Semiconductor Group |
ISDN DC Converter Circuit IDCC | |
7 | PEB2025 |
Siemens Semiconductor |
ISDN Exchange Power Controller | |
8 | PEB20320 |
Infineon Technologies AG |
Multichannel Network Interface Controller | |
9 | PEB20321 |
Siemens Semiconductor Group |
Multichannel Network Interface Controller | |
10 | PEB20321 |
Infineon Technologies AG |
Multichannel Network Interface Controller | |
11 | PEB20324 |
Infineon Technologies AG |
Multichannel Network Interface Controller | |
12 | PEB2035 |
Siemens Semiconductor |
Advanced CMOS Frame Aligner |