The PEB 4050 is a half-bridge power module featuring two silicon IGBTs (i.e. one phase-leg). It is designed for use as a building block for power electronic converters. Direct access to the gating signals is offered using optical fiber inputs, while galvanically-isolated on-board sensors provide analog measurements related to the DC voltage and the AC output.
AND SPECIFICATIONS
» Half-bridge topology (IGBT phase-leg) » Embedded 1100 µF DC bus » On-board voltage and current sensors » Over voltage/current/temperature protections » 650 V / 75 A silicon IGBTs » 400 V nominal DC bus voltage » 50 A continuous RMS current at 20 kHz » Fast and soft antiparallel diode » Speed-regulated cooling (140 W TDP) » 100 x 332 mm Eurocard form factor
SIMILAR PRODUCTS
Other types of half-bridge modules are available from imperix, with different voltage and current ratings as well as different semiconductor technologies: » PEB 8038
– 800 V / 38 A
– Higher power » PEB .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PEB4065 |
Siemens Semiconductor Group |
High Voltage Subscriber Liner | |
2 | PEB4165 |
Siemens |
Advanced High Voltage Subscriber Liner | |
3 | PEB4262 |
Infineon |
Voice and Interbet Enhanced Telephony Interface | |
4 | PEB4264 |
Infineon Technologies Corporation |
Dual Channel Subscriber Line Interface | |
5 | PEB4265 |
Infineon Technologies Corporation |
Dual Channel Subscriber Line Interface | |
6 | PEB4266 |
Infineon Technologies Corporation |
Dual Channel Subscriber Line Interface | |
7 | PEB4268 |
Infineon |
Voice and Interbet Enhanced Telephony Interface | |
8 | PEB4364 |
Infineon |
Dual Channel Subscriber Line Interface | |
9 | PEB4365 |
Infineon |
Dual Channel Subscriber Line Interface | |
10 | PEB-2770 |
Portwell |
Embedded System Board Manual | |
11 | PEB-2780 |
Portwell |
Embedded System Board Manual | |
12 | PEB1756E |
Exar Corporation |
16 STS-48/STM-16 MUX/DEMUX |