APPLICATIONS PCF5078 • Global System for Mobile communication (GSM) • Personal Communications Network (PCN) systems. This CMOS device integrates an amplifier for the detected RF voltage from the sensor, an integrator and an active filter to build a PA control loop for cellular systems with a small amount of passive components. MAX. 5.0 +85 UNIT V mA °C .
• Compatible with baseband interface family PCF5073x
• Two power sensor inputs
• Temperature compensation of sensor signal
• Active filter for DAC input
• Power Amplifier (PA) protection against mismatching
• Bias current source for detector diodes
• Generation of pre-bias level for PA at start of burst (home position)
• Possibility to adapt home position by external components
• Applicable for a wide range of silicon and GaAs power amplifiers. QUICK REFERENCE DATA SYMBOL VDD IDD(tot) Tamb supply voltage total supply current operating ambient temperature PARAMETER − −40 MIN. 2.4 − − TYP. 3.6 6.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PCF50732 |
NXP |
Baseband and audio interface | |
2 | PCF5077T |
NXP |
Power amplifier controller | |
3 | PCF5079 |
NXP |
Dual-band power amplifier controller | |
4 | PCF5001 |
NXP |
POCSAG Paging Decoder | |
5 | PCF50603 |
NXP |
Controller for power supply and battery management | |
6 | PCF50605 |
Philips |
Controller for Power Supply and Battery Management | |
7 | PCF50605HN |
Philips |
Controller for Power Supply and Battery Management | |
8 | PCF50606 |
Philips |
Controller for Power Supply and Battery Management | |
9 | PCF50606HN |
Philips |
Controller for Power Supply and Battery Management | |
10 | PCF50633 |
NXP |
Power supply and battery management controller | |
11 | PCF5081 |
NXP |
GSM baseband processors | |
12 | PCF5082 |
NXP |
GSM baseband processors |