The PCA9704 is a low power 18 V tolerant SPI General Purpose Input (GPI) shift register designed to monitor the status of switch inputs. It generates an interrupt when one or more of the switch inputs change state but allows selected inputs to not generate interrupts using the interrupt masking feature. The input level is recognized as a HIGH when it is grea.
8 general purpose input ports
18 V tolerant input ports with 100 k external series resistor
Input LOW threshold 0.55 VDD with minimum of 2.5 V at VDD = 4.5 V
Open-drain interrupt output
Interrupt enable pin (INT_EN) disables GPI pins and interrupt output
Interrupt-masking feature allows no interrupt generation from selected inputs
VDD range: 4.5 V to 5.5 V
IDD is very low 2.5 A maximum
SPI serial interface with speeds up to 5 MHz
SPI supports daisy-chain connection for large switch numbers
AEC-Q100 compliance available
NXP Semiconductors
PCA9704
18 V tolerant SPI 8-.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PCA9701 |
NXP Semiconductors |
16-bit/8-bit GPI | |
2 | PCA9702 |
NXP Semiconductors |
16-bit/8-bit GPI | |
3 | PCA9703 |
NXP |
16-bit GPI | |
4 | PCA9745B |
NXP |
LED driver | |
5 | PCA9306 |
Texas Instruments |
SMBus Voltage-Level Translator | |
6 | PCA9306 |
NXP Semiconductors |
Dual bidirectional I2C-bus and SMBus voltage-level translator | |
7 | PCA9306 |
ON Semiconductor |
Dual Bidirectional I2C-bus and SMBus Voltage-Level Translator | |
8 | PCA9306-Q1 |
Texas Instruments |
SMBus Voltage-Level Translator | |
9 | PCA9410 |
NXP |
DC-to-DC boost converter | |
10 | PCA9410A |
NXP |
DC-to-DC boost converter | |
11 | PCA9420 |
NXP |
Power management | |
12 | PCA9450 |
NXP |
Power management |