SMT CURRENT SENSE TRANSFORMERS P820X Series Height: 5.1mm Max* Footprint: 8.4mm x 7.2mm Max Current Rating: up to 10A Frequency Range: 50kHz to 1MHz Lower Primary DCR version available: PA1005.XXX series Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C Part 6,7 Number Turns Ratio Current 2 Rating (A) Secondary Inductance (mH MIN).
rature rise of 40°C with no airflow when both one turn windings connected in parallel.
3. To calculate the value of the terminating resistor (Rt) use the following formula: Rt (Ω) = Vref
* N / (Ipeak_primary)
4. The peak flux density of the device must remain below 2000 Gauss. To
calculate the peak flux density for uni-polar current use following formula:
BPK = 37.59
* VREF
* (Duty_Cycle_Max)
* 105 / ( N
* Freq_kHz)
* for bi-polar current applications divide BPK (as calculated above) by 2. 5. Part numbers P8222 to P8229 are reverse polarity versions of P820X.
6. Optional Tape & Reel packaging.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | P8202 |
Pulse |
SMT CURRENT SENSE TRANSFORMERS | |
2 | P8203 |
Pulse |
SMT CURRENT SENSE TRANSFORMERS | |
3 | P8204 |
Pulse |
SMT CURRENT SENSE TRANSFORMERS | |
4 | P8205 |
Pulse |
SMT CURRENT SENSE TRANSFORMERS | |
5 | P82050 |
Intel |
Asynchronous Communications Controller | |
6 | P82050 |
Intel |
Asynchronous Communications Controller | |
7 | P8206 |
Pulse |
SMT CURRENT SENSE TRANSFORMERS | |
8 | P8207 |
Pulse |
SMT CURRENT SENSE TRANSFORMERS | |
9 | P8208 |
Pulse |
SMT CURRENT SENSE TRANSFORMERS | |
10 | P8212 |
Hamamatsu Corporation |
Light emitting/receiving module | |
11 | P8212 |
Intel |
8-BIT INPUT/OUTPUT PORT | |
12 | P8214 |
Intel |
Priority Interrupt Control Unit |