The P4KE Series is designed specifically to protect sensitive electronic equipment from EFTs, ESD, and induced lightning transients. Features • 400W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% • Glass passivated chip junction in DO-41 Package • Fast response time: typically less than 1.0ps from 0 Volts to VBR min • Exce.
• 400W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
• Glass passivated chip junction in DO-41 Package
• Fast response time: typically less than 1.0ps from 0 Volts to VBR min
• Excellent clamping capability
• Typical failure mode is a short circuit
• Whisker test is conducted per Table 4a/4c of JEDEC JESD201A
• IEC 61000-4-2 ESD 30kV(Air), 30kV (Contact)
• EFT protection of data lines in accordance with IEC 61000-4-4
• Low incremental surge resistance
• Typical IR ≤ 1 µA for VBR min > 12.6 V
• High temperature reflow soldering guaranteed: 260°C/30sec / .
P4KE6.8(C)A THRU P4KE550(C)A E480232 Features • Low Zener Imdepance • High Temp Soldering: 260°C for 10 Seconds At Term.
Page HITANO ENTERPRISE CORP. 7F-7, No. 3, Wu Chuan 1st Road, New Taipei Industrial Park, New Taipei City, TAIWAN, R.O..
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | P4KE510C |
HITANO |
Transient Voltage Suppressors | |
2 | P4KE510C-LF |
Sirectifier |
(P4KExxx-LF) 400W TRANSIENT VOLTAGE SUPPRESSOR | |
3 | P4KE510CA-LF |
Sirectifier |
(P4KExxx-LF) 400W TRANSIENT VOLTAGE SUPPRESSOR | |
4 | P4KE510 |
HITANO |
Transient Voltage Suppressors | |
5 | P4KE510-LF |
Sirectifier |
(P4KExxx-LF) 400W TRANSIENT VOLTAGE SUPPRESSOR | |
6 | P4KE510A |
MCC |
TVS | |
7 | P4KE510A |
HITANO |
Transient Voltage Suppressors | |
8 | P4KE510A |
Littelfuse |
TVS Diode | |
9 | P4KE510A |
Vishay |
TRANSZORB TVS | |
10 | P4KE510A-LF |
Sirectifier |
(P4KExxx-LF) 400W TRANSIENT VOLTAGE SUPPRESSOR | |
11 | P4KE51 |
Diotec |
Transient Voltage Suppressor Diodes | |
12 | P4KE51 |
Microsemi |
400 Watt Transient Voltage Suppressor |