Two-chip SIDACtor Device Two-chip SIDACtor Device 1 (T) 3 (R) 2 (G) The two-chip modified TO-220 SIDACtor solid state device protects telecommunication equipment in applications that reference Tip and Ring to earth ground but do not require balanced protection. SIDACtor devices are used to enable equipment to meet various regulatory requirements including .
30 30 30
Pins 1-2, 3-2
Pins 1-3
* For individual “AA”, “AB”, and “AC” surge ratings, see table below. General Notes:
• All measurements are made at an ambient temperature of 25 °C. IPP applies to -40 °C through +85 °C temperature range.
• IPP is a repetitive surge rating and is guaranteed for the life of the product.
• Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
• VDRM is measured at IDRM.
• VS is measured at 100 V/µs.
• Special voltage (VS and VDRM) and holding current (IH) requirements are available upon.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | P1602AA |
Littelfuse |
SIDACtor Protection Thyristors | |
2 | P1602AB |
Littelfuse |
SIDACtor Protection Thyristors | |
3 | P1602AC |
Littelfuse |
SIDACtor Protection Thyristors | |
4 | P1602ACMC |
Littelfuse |
SIDACtor Protection Thyristors | |
5 | P1602ACMC |
LittelFuse |
Two-Chip MicroCapacitance | |
6 | P1602AxRP |
LittelFuse |
SIDACtor All IC Data Book | |
7 | P1602C |
LittelFuse |
Compak Two-Chip SIDACtor Device | |
8 | P1602CAL |
Littelfuse |
Compak TwinCHIP SIDACtor Device | |
9 | P1602CBL |
Littelfuse |
Compak TwinCHIP SIDACtor Device | |
10 | P1602Z |
LittelFuse |
Four-Port Longitudinal Two-Chip Protector | |
11 | P160 |
TT |
Rotary Potentiometer | |
12 | P1603BD |
UNIKC |
N-Channel MOSFET |