2 system level description 2.1 overview 2.2 architecture 2.3 format and frame 2.4 I/O control 2.5 MIPI interface 2.6 VSYNC timing in MIPI mode 2.6.1 VSYNC modes 2.7 power management 2.7.1 power up sequence 2.7.2 power down sequence 2.8 reset 2.8.1 power ON reset generation 2.9 hardware and software standby 2.10 system clock control 2.10.1 PLL configuration .
automatic black level calibration (ABLC) programmable controls for frame rate, mirror and flip, cropping and windowing image quality controls: lens correction and defective pixel canceling supports output formats: 8/10/12-bit RAW RGB (MIPI/LVDS) supports horizontal and vertical sub-sampling supports images sizes: 1280x800, 640x400, and 320x200 fast mode switching 00key specifications (typical) active array size: 1296 x 812 power supply: core: 1.5VDC ± 5% analog: 2.6 ~ 3.0V I/O: 1.7 ~ 3.0V power requirements: active: 95 mA standby: 30 µA xshutdown: 5 µA temperature range: .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | OV9710 |
OmniVision |
CMOS 1.0 Megapixel (1280x800) HD sensor | |
2 | OV9712 |
OmniVision |
CMOS WXGA (1 megapixel) HD sensor | |
3 | OV9716 |
OmniVision |
HDR image sensor | |
4 | OV9121 |
Omni Vision |
(OV9121 / OV9625) CMOS SXGA Carerachip | |
5 | OV9625 |
Omni Vision |
(OV9121 / OV9625) CMOS SXGA Carerachip | |
6 | OV9640FBG |
Omnivision |
Color CMOS 1.3 MegaPixel Concept Camera Module | |
7 | OV9650 |
Omnivision |
Color CMOS SXVGA | |
8 | OV9653 |
Omnivision |
Color CMOS SXGA CAMERACHIP Sensor | |
9 | OV9656 |
Omnivision |
1.3 MegaPixel CAMERACHIP Sensor | |
10 | OV9665 |
OmniVision |
Color CMOS SXGA CameraChip Sensor | |
11 | OV-0100-C7 |
MICORO CRYSTAL SWITZERLAND |
Low Power Clock Oscillator | |
12 | OV-7605-C8 |
MICORO CRYSTAL SWITZERLAND |
Low Power Clock Oscillator |