Each OPB821TX device consists of a gallium aluminum arsenide LED and a silicon phototransistor, which are soldered into a printed circuit board and mounted in a high temperature plastic housing on opposite sides of an 0.080” (2.03 mm) wide slot. Lead wires are #24 AWG polytetraflouroethylene (PTFE) insulated, which conforms to MIL-W-16878. Phototransistor .
• Non-contact switching
• Low profile to facilitate stacking
• Hermetically sealed components
• 24” (609.60 mm) minimum length wire conforms to MIL-W-16878
• TX components processed to MIL-PRF-19500
Description:
Each OPB821TX device consists of a gallium aluminum arsenide LED and a silicon phototransistor, which are soldered into a printed circuit board and mounted in a high temperature plastic housing on opposite sides of an 0.080” (2.03 mm) wide slot. Lead wires are #24 AWG polytetraflouroethylene (PTFE) insulated, which conforms to MIL-W-16878.
Phototransistor switching takes place when .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | OPB821 |
OPTEK |
Slotted Optical Switches | |
2 | OPB821S10 |
OPTEK |
Slotted Optical Switches | |
3 | OPB821S10Z |
TT |
Slotted Optical Switch | |
4 | OPB821S3 |
OPTEK |
Slotted Optical Switches | |
5 | OPB821S3Z |
TT |
Slotted Optical Switch | |
6 | OPB821S5 |
OPTEK |
Slotted Optical Switches | |
7 | OPB821S5Z |
TT |
Slotted Optical Switch | |
8 | OPB821Z |
TT |
Slotted Optical Switch | |
9 | OPB820 |
TT |
Slotted Optical Switch | |
10 | OPB820S |
TT |
Slotted Optical Switch | |
11 | OPB820S10 |
TT |
Slotted Optical Switch | |
12 | OPB820S3 |
TT |
Slotted Optical Switch |