The OP179 and OP279 are rail-to-rail, high output current, single-supply amplifiers. They are designed for low voltage applications that require either current or capacitive load drive capability. The OP179/OP279 can sink and source currents of ± 60 mA (typical) and are stable with capacitive loads to 10 nF. Applications that benefit from the high output cur.
Rail-to-Rail Inputs and Outputs High Output Current: ؎60 mA Single Supply: 5 V to 12 V Wide Bandwidth: 5 MHz High Slew Rate: 3 V/s Low Distortion: 0.01% Unity-Gain Stable No Phase Reversal Short-Circuit Protected Drives Capacitive Loads: 10 nF APPLICATIONS Multimedia Telecom DAA Transformer Driver LCD Driver Low Voltage Servo Control Modems FET Drivers GENERAL DESCRIPTION The OP179 and OP279 are rail-to-rail, high output current, single-supply amplifiers. They are designed for low voltage applications that require either current or capacitive load drive capability. The OP179/OP279 can sink an.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | OP27 |
Analog Devices |
Low-Noise / Precision Operational Amplifier | |
2 | OP27 |
Maxim Integrated Products |
Low-Noise Precision Operaional Amplifiers | |
3 | OP27 |
Texas Instruments |
LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS | |
4 | OP270 |
Analog Devices |
DUAL VERY LOW NOISE PRECISION OPERATIONAL AMPLIFIER | |
5 | OP271 |
Analog Devices |
HIGH SPEED DUAL OPERATIONAL AMPLIFIER | |
6 | OP271 |
Analog Devices |
HIGH SPEED DUAL OPERATIONAL AMPLIFIER | |
7 | OP275 |
Analog Devices |
Dual Bipolar/JFET / Audio Operational Amplifier | |
8 | OP27A |
Texas Instruments |
LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS | |
9 | OP27C |
Texas Instruments |
LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIERS | |
10 | OP27GP |
Maxim Integrated Products |
Low-Noise Precision Operaional Amplifiers | |
11 | OP27GP |
Analog Devices |
Low-Noise / Precision Operational Amplifier | |
12 | OP20 |
PMI |
Micropower Operational Amplifier |