The NW6006 device is a single-chip, 3/5 Volt CMOS caller ID with call waiting detection circuit. It can receive signals following Bellcore GR-30-CORE & SR-TSV-002476, BT SIN227 & SIN242, and ETSI ETS 300 788-1/-2 specifications. The NW6006 provides 1200 baud Bell 202 and ITU-T V.23 FSK demodulation, detection in stutter dial tone mode and CAS/DT-AS detection.
•
•
•
NW6006
DESCRIPTION
The NW6006 device is a single-chip, 3/5 Volt CMOS caller ID with call waiting detection circuit. It can receive signals following Bellcore GR-30-CORE & SR-TSV-002476, BT SIN227 & SIN242, and ETSI ETS 300 788-1/-2 specifications. The NW6006 provides 1200 baud Bell 202 and ITU-T V.23 FSK demodulation, detection in stutter dial tone mode and CAS/DT-AS detection. Two seperate differential input amplifiers allow the device to be connected with both Tip/Ring and Telephone Hybrid receive pair. FSK demodulation is implemented only on Tip/Ring, while DT-AS(or CAS) detection c.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NW6003 |
Integrated Device Technology |
TYPE II CALLER ID DECODER | |
2 | NW6005 |
Integrated Device Technology |
ENHANCED TYPE II CALLER ID DECODER | |
3 | NW6006-XS |
Integrated Device Technology |
ENHANCED TYPE II CALLER ID DECODER WITH STUTTER DIAL TONE DETECTOR | |
4 | NW19M12WA |
NIHON DEMPA KOGYO |
Frequency Timing and Translation Modules | |
5 | NW19M12WB |
NIHON DEMPA KOGYO |
Frequency Timing and Translation Modules | |
6 | NW25H2000X |
Nano MEMS |
Pressure sensor | |
7 | NW34M25WA |
NIHON DEMPA KOGYO |
Frequency Controlled Crystal Oscillator | |
8 | NW36M25LA |
NIHON DEMPA KOGYO |
Frequency Controlled Crystal Oscillator | |
9 | NW5 |
Rubycon |
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS | |
10 | NW5061 |
Damai Technology |
WLAN module | |
11 | NW7 |
Rubycon |
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS | |
12 | NW701 |
Divio |
Daad(tm) Digital to Analog / Analog to Digital DV Codec |