Recherchez avec le numéro de pièce ainsi que le fabricant ou la description
www.DataSheet.co.kr TFT COLOR LCD MODULE NL3224BC35-21 13.9cm (5.5 Type) QVGA DATA SHEET DOD-PD-0638 (1st edition) All information is subject to change without notice. Please confirm the sales representative before starting to design your system. Document Number: DOD-PD-0638 (1st edition) Published date: September 2004 CP(N) 1 © NEC LCD Technologies, Lt.
NEC products are classified into the following three quality grades: "Standard", "Special", "Specific" The "Specific" quality grade applies only to applications developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a product depend on its quality grade, as indicated below. Customers must check the quality grade of each application before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appli.
| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
| 1 | NL3224BC35-20 |
NEC Electronics |
TFT Color LCD |
|
| 2 | NL3224BC35-22 |
NEC Electronics |
TFT Color LCD Module |
|
| 3 | NL3224AC35-01 |
NEC |
14 cm 5.5 inches / 320 x 240 Pixels / Full color NTSC/PAL mode / Wide temperature range |
|
| 4 | NL3224AC35-06 |
NEC |
14 cm 5.5 Type / 320 x 240 Pixels / Full color / RGB separate input NTSC Conposite input / Incorporated backlight with inverter |
|
| 5 | NL3224AC35-10 |
NEC |
14 cm 5.5 inches / 320 x 240 Pixels / Full color Incorporated backlight with inverter |
|
| 6 | NL3224AC35-13 |
NEC |
14 cm 5.5 inches / 320 x 240 Pixels / Full color NTSC/PAL mode / Wide temperature range |
|
| 7 | NL3225 |
TDK |
SMD Inductors |
|
| 8 | NL3225 |
Cal-Chip |
Molded Chip Wirewound Inductors |
|
| 9 | NL322522 |
Yageo |
Wound Chip Inductors |
|
| 10 | NL322522T |
Yageo |
Wound Chip Inductors |
|
| 11 | NL3225T |
TDK |
SMD Inductors |
|
| 12 | NL300001P0 |
SUNUL |
TFT LCD |
|