Pin No. Pin Symbol Function 1 STATUS This is an open−drain diagnostic. IC status operation flag indicator. This output is a logic low when IC VOUT is below the wake up threshold voltage (Thic,en) and device is active. A pull−up resistor of around 80 kW should be connected between STATUS and a microcontroller reference. This output is a logic high when.
include, cycle-by-cycle current limiting and thermal shutdown.
Additional features include low quiescent current sleep mode operation. The NCV8878 is enabled when the supply voltage drops below the wake up threshold. Boost Operation is initiated when the supply voltage drops below the regulation set point.
Features
• Automatic Enable Below Wake Up Threshold Voltage (Factory
Programmable)
• Status Pin Diagnostic Function
• Override Disable Function
• Boost Mode Operation at Regulation Set Point
• $2% Output Accuracy Over Temperature Range
• Peak Current Mode Control with Internal Slope Compensa.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NCV8870 |
ON Semiconductor |
Automotive Grade Non-Synchronous Boost Controller | |
2 | NCV8871 |
ON Semiconductor |
Automotive Grade Non-Synchronous Boost Controller | |
3 | NCV887200 |
ON Semiconductor |
Automotive Grade Non-Synchronous Boost Controller | |
4 | NCV8873 |
ON Semiconductor |
Automotive Grade Non-Synchronous Boost Controller | |
5 | NCV8876 |
ON Semiconductor |
Automotive Grade Start-Stop Non-Synchronous Boost Controller | |
6 | NCV8877 |
ON Semiconductor |
Automotive Grade Start-Stop Non-Synchronous Boost Controller | |
7 | NCV8800 |
ON Semiconductor |
Synchronous Buck Regulator | |
8 | NCV881930 |
ON Semiconductor |
Low Quiescent Current 410kHz Automotive Synchronous Buck Controller | |
9 | NCV8842 |
ON Semiconductor |
Buck Regulator | |
10 | NCV8843 |
ON Semiconductor |
Buck Regulator | |
11 | NCV8851 |
ON Semiconductor |
Automotive Grade Synchronous Buck Controller | |
12 | NCV8851-1 |
ON Semiconductor |
Automotive Grade Synchronous Buck Controller |