Recherchez avec le numéro de pièce ainsi que le fabricant ou la description
Pin No. TSOP−5 Pin No. WDFNW6 Pin Name Description 1 6 IN Power supply input pin. 2 3 GND Ground pin. 5 1 OUT LDO output pin. 3 4 EN Enable input pin (high − enabled, low − disabled). If this pin is connected to IN pin or if it is left unconnected (pull−up resistor is not required) the device is en- abled. 4 (Note 1) 2 ADJ Adjust inpu.
− very low quiescent current, fast transient response and high input and output voltage ranges. The NCV8711 is CMOS LDO regulator designed for up to 18 V input voltage and 100 mA output current. Quiescent current of only 1 mA makes this device ideal solution for battery−powered, always−on systems. Several fixed output voltage versions are available as well as the adjustable version. The device (version B) implements power good circuit (PG) which indicates that output voltage is in regulation. This signal could be used for power sequencing or as a microcontroller reset. Internal short circuit a.
| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
| 1 | NCV8715 |
ON Semiconductor |
Linear Voltage Regulator |
|
| 2 | NCV8716 |
ON Semiconductor |
Low Dropout Regulator |
|
| 3 | NCV8702 |
ON Semiconductor |
LDO Linear Voltage Regulator |
|
| 4 | NCV8703 |
ON Semiconductor |
LDO Voltage Regulator |
|
| 5 | NCV8705 |
ON Semiconductor |
LDO Regulator |
|
| 6 | NCV8720 |
ON Semiconductor |
CMOS Voltage Regulator |
|
| 7 | NCV8730 |
ON Semiconductor |
LDO Regulator |
|
| 8 | NCV8752 |
ON Semiconductor |
Low Dropout Regulator |
|
| 9 | NCV8760C |
ON Semiconductor |
LD0 Regulator |
|
| 10 | NCV8768 |
ON Semiconductor |
LDO Regulator |
|
| 11 | NCV8768C |
ON Semiconductor |
LDO Regulator |
|
| 12 | NCV8769 |
ON Semiconductor |
LDO Regulator |
|