Recherchez avec le numéro de pièce ainsi que le fabricant ou la description
Symbol Description FLTREF Analog Fault Detect Threshold: 5.0 V Compliant DRN0 – DRN5 Analog Drain Feedback: Internally Clamped GAT0 – GAT5 Analog Gate Drive: 5.0 V Compliant ENA1, ENA2 Digital Master Enable Inputs: 3.3 V/5.0 V (TTL) Compatible IN0 – IN5 Digital Parallel Input: 3.3 V/5.0 V (TTL) Compatible CSB Digital Chip Select Input: 3.3 V/5..
programmable fault management modes and allows power−limiting PWM operation with programmable refresh time. The device offers 3.3 V/5.0 V compatible inputs and the serial output driver can be powered from either 3.3 V or 5.0 V. Power−on reset provides controlled powerup and two enable inputs allow all outputs to be simultaneously disabled. Each channel independently monitors its external MOSFET’s drain voltage for fault conditions. Shorted load fault detection thresholds are fully programmable using an externally programmed reference voltage and a combination of four discrete internal ratio va.
| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
| 1 | NCV7510 |
ON Semiconductor |
FlexMOS Programmable Peak and Hold PWM MOSFET Predriver |
|
| 2 | NCV7512 |
ON Semiconductor |
Quad Low-Side Pre-driver |
|
| 3 | NCV7513B |
ON Semiconductor |
Hex Low-Side MOSFET Pre-Driver |
|
| 4 | NCV7517 |
ON Semiconductor |
Hex Low-Side MOSFET Pre-Driver |
|
| 5 | NCV7517B |
ON Semiconductor |
Hex Low-Side MOSFET Pre-Driver |
|
| 6 | NCV7518 |
ON Semiconducto |
Hex Low side MOSFET Pre driver |
|
| 7 | NCV7518A |
ON Semiconductor |
Hex Low side MOSFET Pre driver |
|
| 8 | NCV7519 |
ON Semiconductor |
Hex Low-side MOSFET Pre-driver |
|
| 9 | NCV7519A |
ON Semiconductor |
Hex Low-side MOSFET Pre-driver |
|
| 10 | NCV7520 |
ON Semiconductor |
Hex Low-side MOSFET Pre-driver |
|
| 11 | NCV75215 |
ON Semiconductor |
Ultrasonic Parking Distance Measurement ASSP |
|
| 12 | NCV7001 |
ON Semiconductor |
Quad Variable Reluctance Sensor |
|