ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁPin No. Pin Name Description ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ1 Vin Positive power supply input voltage. ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ2 GND Power supply ground. ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ3 Enable This input is used to place the device into low−power standby. When this input is pulled low, the device ÁÁÁÁ.
an ultra−low quiescent current of 40 mA. Each device contains a voltage reference unit, an error amplifier, a PMOS power transistor, resistors for setting output voltage, current limit, and temperature limit protection circuits.
The NCP511 has been designed to be used with low cost ceramic capacitors and requires a minimum output capacitor of 1.0 mF. The device is housed in the micro−miniature TSOP−5 surface mount package. Standard voltage versions are 1.5 V, 1.8 V, 2.5 V, 2.7 V, 2.8 V, 3.0 V, 3.3 V, and 5.0 V. Other voltages are available in 100 mV steps.
Features
• Low Quiescent Current of 4.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NCV5104 |
ON Semiconductor |
Half Bridge Driver | |
2 | NCV5106A |
ON Semiconductor |
600V Automotive High and Low Side Driver | |
3 | NCV5106B |
ON Semiconductor |
600V Automotive High and Low Side Driver | |
4 | NCV51152 |
ON Semiconductor |
Single Channel Gate Driver | |
5 | NCV51190 |
ON Semiconductor |
1.5A DDR Memory Termination Regulator | |
6 | NCV51198 |
ON Semiconductor |
1.5A DDR Memory Termination Regulator | |
7 | NCV51199 |
ON Semiconductor |
Termination Regulator | |
8 | NCV51200 |
ON Semiconductor |
Linear Voltage Regulator | |
9 | NCV51400 |
ON Semiconductor |
3Amp Termination Regulator | |
10 | NCV51411 |
ON Semiconductor |
Low Voltage Buck Regulator | |
11 | NCV51460 |
ON Semiconductor |
20mA Micropower Precision Voltage Reference | |
12 | NCV51510 |
ON Semiconductor |
Termination Source / Sink Regulator |