Pin No. Pin No. SOIC−14 TSSOP−14 Symbol Description 1 1 RADJ Reset Adjust. Use resistor divider to Q to adjust reset threshold lower. Connect to GND if not used. 2 3 D Reset Delay. Connect external capacitor to ground to set delay time. 3 4 GND Ground 4 − GND Ground 5 − GND Ground 6 5 INH Inhibit. Connect to I if not needed. A high turns.
microprocessor interfaces including an adjustable reset output and adjustable system monitor to provide shutdown early warning. An inhibit function is available. With inhibit active, the regulator turns off and the device consumes less than 1.0 mA of quiescent current.
The part can withstand load dump transients making it suitable for use in automotive environments.
Features
• 5.0 V, 3.3 V ±2%, 150 mA
• Extremely Low Current Consumption
♦ 65 mA (Typ) in the ON Mode ♦ t1.0 mA in the Off Mode
• Early Warning
• Reset Output Low Down to VQ = 1.0 V
• Adjustable Reset Threshold
• Wide Temperature Ra.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NCV4299 |
ON Semiconductor |
Low-Dropout Voltage Regulator | |
2 | NCV4299C |
ON Semiconductor |
150mA Low-Dropout Voltage Regulator | |
3 | NCV4290 |
ON Semiconductor |
450mA Low Drop Voltage Regulator | |
4 | NCV4294C |
ON Semiconductor |
Low Drop Voltage Regulator | |
5 | NCV4296-2C |
ON Semiconductor |
Voltage Regulator | |
6 | NCV4250-2C |
ON Semiconductor |
Low Dropout Voltage Tracking Regulator | |
7 | NCV4254C |
ON Semiconductor |
Low Dropout Voltage Tracking Regulator | |
8 | NCV4263-2C |
ON Semiconductor |
200mA LDO Regulator | |
9 | NCV4264 |
ON Semiconductor |
Low Dropout Linear Regulator | |
10 | NCV4264-2 |
ON Semiconductor |
Low Dropout Linear Regulator | |
11 | NCV4264-2C |
ON Semiconductor |
Low Dropout Linear Regulator | |
12 | NCV4266 |
ON Semiconductor |
150mA Low-Dropout Voltage Regulator |