DATA SHEET www.onsemi.com Voltage Regulator - Low Power Low, Dropout 100 mA LP2950, LP2951, NCV2951 The LP2950 and LP2951 are micropower voltage regulators that are specifically designed to maintain proper regulation with an extremely low input−to−output voltage differential. These devices feature a very low quiescent bias current of 75 mA and are capable o.
The first is the Error Output that can be used to signal external circuitry of an out of regulation condition, or as a microprocessor power−on reset. The second feature allows the output voltage to be preset to 5.0 V, 3.3 V or 3.0 V output (depending on the version) or programmed from 1.25 V to 29 V. It consists of a pinned out resistor divider along with direct access to the Error Amplifier feedback input. The third feature is a Shutdown input that allows a logic level signal to turn−off or turn−on the regulator output. Due to the low input−to−output voltage differential and bias current spe.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NCV2901 |
ON Semiconductor |
Single Supply Quad Comparators | |
2 | NCV2902 |
ON |
Single Supply Quad Operational Amplifiers | |
3 | NCV2903 |
ON Semiconductor |
Low Offset Voltage Dual Comparators | |
4 | NCV2903V |
ON Semiconductor |
Low Offset Voltage Dual Comparators | |
5 | NCV2904 |
ON Semiconductor |
Single Supply Dual Operational Amplifiers | |
6 | NCV2931 |
ON Semiconductor |
LDO Voltage Regulator | |
7 | NCV2931AC |
ON Semiconductor |
LDO Voltage Regulator | |
8 | NCV2931C |
ON Semiconductor |
LDO Voltage Regulator | |
9 | NCV2001 |
ON Semiconductor |
Single Operational Amplifier | |
10 | NCV2002 |
ON Semiconductor |
Sub-One Volt Rail-to-Rail Operational Amplifier | |
11 | NCV2003 |
ON Semiconductor |
Low Voltage Rail-to-Rail Output Operational Amplifier | |
12 | NCV20032 |
ON Semiconductor |
Rail-to-Rail Output Operational Amplifiers |