Pin No. Symbol 1 IN+ 2 GND 3 GND 4 OUTL 5 OUTH 6 VDD 7 VDD 8 IN− Description Non−Inverting Input which has logic compatible threshold and hysteresis. If not used, this pin should be connected to VDD. It should not be left unconnected. Common ground. This ground should be connected very closely to the source of the power MOSFET. Common groun.
• High Current Drive Capability ±10 A
• TTL/CMOS Compatible Inputs Independent of Supply Voltage
• High Reverse Current Capability (10 A) Peak
• 4 ns Typical Rise and 4 ns Typical Fall Times with 1.8 nF Load
• Fast Propagation Delay Times of 15 ns with Input Falling and 15 ns
with Input Rising
• Input Voltage Range from 4.5 V to 20 V
• Split Output Configuration
• Dual Input Design Offering Drive Flexibility
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Applications
• Server Power
• Telecommunication, Datacenter Power
• Synchronous Rectifier
• Switch Mode Power Supp.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NCP81074B |
ON Semiconductor |
Single Channel 10A High Speed Low-Side MOSFET Driver | |
2 | NCP81071 |
ON Semiconductor |
Dual 5A High Speed Low-Side MOSFET Drivers | |
3 | NCP81075 |
ON Semiconductor |
Dual MOSFET | |
4 | NCP81038 |
ON Semiconductor |
Synchronous Buck Controller | |
5 | NCP81039 |
ON Semiconductor |
Synchronous Buck Controller | |
6 | NCP81040 |
ON Semiconductor |
Programmable Multi-Phase Synchronous Buck Converter | |
7 | NCP81042 |
ON Semiconductor |
Precise Low Voltage Synchronous Buck Controller | |
8 | NCP81044 |
ON Semiconductor |
Low Voltage Synchronous Buck Controller | |
9 | NCP81045 |
ON Semiconductor |
Single Synchronous Step-Down Controller | |
10 | NCP81046 |
ON Semiconductor |
Low Voltage Synchronous Buck Controller | |
11 | NCP81062 |
ON Semiconductor |
VR12 Compatible Synchronous Buck MOSFET Drivers | |
12 | NCP81063 |
ON Semiconductor |
Synchronous Buck MOSFET Drivers |