Pin No. Pin Name Description 1 PVCC Input voltage which supplies current to the output pin. CIN = 470 mF with low ESR. 2 GND Common Ground 3 VREF Buffered reference voltage input equal to ½ of VDDQ and active low shutdown pin. An external resistor divider dividing down the PVCC voltage creates the regulated output voltage. Pulling the pin to gro.
include source/sink current limiting, soft−start and on−chip thermal shutdown protection.
Features
• Supports DDR−2 VTT Termination to ±2 A, DDR−3 to ±1.5 A (peak)
• Stable with 10 mF Ceramic Capacitance on VTT Output
• Integrated Power MOSFETs
• High Accuracy VTT Output at Full−Load
• Fast Transient Response
• Built−in Soft−Start
• Shutdown for Standby or Suspend Mode
• Integrated Thermal and Current−Limit Protection
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable
• These Devices are Pb−Free and are .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NCP51190 |
ON Semiconductor |
1.5A DDR Memory Termination Regulator | |
2 | NCP51198 |
ON Semiconductor |
1.5A DDR Memory Termination Regulator | |
3 | NCP511 |
ON |
Low-Dropout Voltage Regulator | |
4 | NCP51105 |
ON Semiconductor |
Low-Side Gate Driver | |
5 | NCP51145 |
ON Semiconductor |
Termination Regulator | |
6 | NCP5104 |
ON Semiconductor |
Half Bridge Driver | |
7 | NCP5106A |
ON Semiconductor |
High and Low Side Driver | |
8 | NCP5106B |
ON Semiconductor |
High and Low Side Driver | |
9 | NCP5109A |
ON Semiconductor |
High and Low Side Driver | |
10 | NCP5109B |
ON Semiconductor |
High and Low Side Driver | |
11 | NCP512 |
ON Semiconductor |
Voltage Regulator | |
12 | NCP51200 |
ON Semiconductor |
Linear Voltage Regulator |