Pin Name Pin Number Type IN A2 POWER GND EN OUT B1 POWER B2 INPUT A1 OUTPUT Description Load−switch input voltage; connect a 1 mF or greater ceramic capacitor from IN to GND as close as possible to the IC. Ground connection. Enable input, logic high turns on power switch. Load−switch output; connect a 1 mF ceramic capacitor from OUT to GND as close as .
• 1 V − 3.6 V Operating Range
• 29 mW P MOSFET at 3.3 V
• DC current up to 2 A
• Output Auto−discharge (NCP435)
• Active high EN pin
• WLCSP4 0.96 x 0.96 mm
• These are Pb−Free Devices
Typical Applications
• Mobile Phones
• Tablets
• Digital Cameras
• GPS
• Portable Devices
www.onsemi.com
WLCSP4 CASE 567FG
MARKING DIAGRAM
1
XX AYW
XX = Specific Device Code A = Assembly Location Y = Year W = Wafer Lot
PIN DIAGRAM 12
A OUT
IN
B GND
EN
(Top View)
ORDERING INFORMATION
See detailed ordering, marking and shipping information in the package dimensions section on page 9 of this data sheet.
.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NCP4300A |
ON |
Dual Operational Amplifier and Voltage Reference | |
2 | NCP4302 |
ON Semiconductor |
Synchronous Rectification Controller | |
3 | NCP4303A |
ON Semiconductor |
Secondary Side Synchronous Rectification Driver | |
4 | NCP4303B |
ON Semiconductor |
Secondary Side Synchronous Rectification Driver | |
5 | NCP4304A |
ON Semiconductor |
Secondary Side Synchronous Rectification Driver | |
6 | NCP4304B |
ON Semiconductor |
Secondary Side Synchronous Rectification Driver | |
7 | NCP4305 |
ON Semiconductor |
Secondary Side Synchronous Rectification Driver | |
8 | NCP4306 |
ON Semiconductor |
Secondary Side Synchronous Rectification Driver | |
9 | NCP4308 |
ON Semiconductor |
Synchronous Rectifier Controller | |
10 | NCP43080 |
ON Semiconductor |
Synchronous Rectifier Controller | |
11 | NCP4318 |
ON Semiconductor |
Advanced Synchronous Rectifier Controller | |
12 | NCP431A |
ON Semiconductor |
Programmable Precision References |