Pin Pin Name Type Description A1 OUT OUTPUT Output voltage pin. The OUT pin must be connected to the circuitry that is to be protected (VCONN rail). B1 EN I/O Enable pin bar. The device enters in shutdown mode when this pin is tied high in which case the output is disconnected from the input. A2 IN POWER Input voltage pin. The IN pin must be .
• Over−voltage Protection up to + 28 V
• On−chip Low Rdson NMOS Transistors: Typical 200 mW
• Over−voltage Lockout (OVLO)
• Shutdown EN Input
• Output Discharge Path
• WLCSP4 Package 0.84 x 0.84 mm, 0.4p
• UDFN6 Package 2 x 2 mm, 0.65p
• These Parts are ROHS Devices
Typical Applications
• Type−C USB
• Smartphones
• Tablets
www.onsemi.com
MARKING DIAGRAMS
UDFN6 CASE 517AB
AV MG G
AV
= Specific Device Code
M
= Date Code
G
= Pb−Free Package
(Note: Microdot may be in either location)
WLCSP4 CASE 567MN
AA AYW
AA
= Specific Device Code
A
= Assembly Location
Y
= Year
W
= Work Wee.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NCP391 |
ON Semiconductor |
Positive Overvoltage Protection Controller | |
2 | NCP392A |
ON Semiconductor |
Adjustable Front End Overvoltage Protection Controller | |
3 | NCP392B |
ON Semiconductor |
Adjustable Front End Overvoltage Protection Controller | |
4 | NCP392D |
ON Semiconductor |
Adjustable Front End Overvoltage Protection Controller | |
5 | NCP3985 |
ON Semiconductor |
Ultra-Low Dropout BiCMOS Voltage Regulator | |
6 | NCP300 |
ON Semiconductor |
Voltage Detector | |
7 | NCP301 |
ON Semiconductor |
Voltage Detector | |
8 | NCP3011 |
ON Semiconductor |
Synchronous PWM Controller | |
9 | NCP3012 |
ON Semiconductor |
Synchronous PWM Controller | |
10 | NCP302 |
ON Semiconductor |
Voltage Detector | |
11 | NCP302035 |
ON Semiconductor |
Integrated Driver/MOSFET | |
12 | NCP302040 |
ON Semiconductor |
Integrated Driver and MOSFET |