Table 1. PIN DESCRIPTIONS Pin Number Pin Name Function 1 FAULT Combined OVP/OTP fault pin. 2 PFCOK The PFCOK pin is held low when the PFC output voltage is out of regulation and during fault conditions. The pin becomes active when the PFC output achieves regulation in nominal operation, sourcing a current proportional to the feedback voltage, VFB. .
• Totem Pole PFC Topology Eliminates Input Diode Bridge Enabling
Very High Efficiency & Compact Design
• AC Line Monitoring Circuit & AC Phase Detection
• Brownout Detection
• Critical Conduction Mode (CrM) Operation
• Discontinuous Conduction Mode (DCM) with Valley Turn On under
Light Load Conditions
• Frequency Foldback in DCM with 25 kHz Minimum Frequency
• Digital Loop Compensation
• Simplified Valley Sensing
• Novel Current Limit Scheme Eliminates the Needs for Hall Effect
Sensors
• Soft Skip Mode with a Skip Flag for Optimizing Light Load
Performance
• Near Unity Power Factor in All Oper.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NCP1681 |
ON Semiconductor |
Totem Pole Power Factor Correction Controller | |
2 | NCP160 |
ON Semiconductor |
Ultra-Low Noise and High PSRR LDO Regulator | |
3 | NCP1600 |
ON Semiconductor |
High Voltage PFC Controller | |
4 | NCP1601A |
ON Semiconductor |
Power Factor Correction Controller | |
5 | NCP1601B |
ON Semiconductor |
Power Factor Correction Controller | |
6 | NCP1602 |
ON Semiconductor |
High-Efficiency Power Factor Controller | |
7 | NCP1603 |
ON Semiconductor |
PFC/PWM Combo Controller | |
8 | NCP1605 |
ON Semiconductor |
Power Factor Controller | |
9 | NCP1605A |
ON Semiconductor |
Power Factor Controller | |
10 | NCP1605B |
ON Semiconductor |
Power Factor Controller | |
11 | NCP1606 |
ON Semiconductor |
Cost Effective Power Factor Controller | |
12 | NCP1607 |
ON Semiconductor |
Cost Effective Power Factor Controller |