Pin # Symbol Pin Description 1 SHD Device is placed in shutdown when SHD is driven low. In shutdown mode, the internal MOSFET and output are turned off. Driven to high for normal operation. This pin is floating internally and needs to be tied to a fixed source externally. 2 SYN External Synchronization Clock Signal Input. If a clock signal is pre.
include thermal shutdown with hysteresis and cycle−by−cycle current limit in the PWM mode. Additionally, the converter transitions into PFM mode at very light loads if a synchronization signal is present and an output overvoltage condition is detected.
PWM Features
• Current Mode Control with Cycle−by−Cycle Current Limit
• Nominal Synchronization Frequency of 270 to 630 kHz
• Built−in Slope Compensation
Linear Regulator Features
• Low Output Noise
Overall Features
• Thermal Shutdown with Hysteresis
• Digitally Programmable Output Voltage Between 4 Voltages:
1.0, 1.3, 1.5, and 1.8
• Fast Transi.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NCP1501 |
ON Semiconductor |
Dual Mode PWM/Linear Buck Converter | |
2 | NCP1508 |
ON Semiconductor |
High Efficiency Synchronous Step-Down DC-DC Converter | |
3 | NCP1509 |
ON Semiconductor |
High Efficiency Synchronous Step-Down DC-DC Converter | |
4 | NCP151 |
ON Semiconductor |
LDO Regulator | |
5 | NCP1512 |
ON Semiconductor |
PWM Buck Converter | |
6 | NCP152 |
ON Semiconductor |
Low Dropout Voltage Regulator | |
7 | NCP1521 |
ON Semiconductor |
Adjustable Output Voltage Step-Down Converter | |
8 | NCP1521B |
ON Semiconductor |
Step-Down DC-DC Converter | |
9 | NCP1522 |
ON Semiconductor |
Adjustable Output Voltage Step-Down Converter | |
10 | NCP1522B |
ON Semiconductor |
600mA Step-Down DC-DC Converter | |
11 | NCP1523 |
ON Semiconductor |
Adjustable Output Voltage Stepdown Converter | |
12 | NCP1526 |
ON Semiconductor |
Step Down Converter |