Pin Symbol Function 1 Demag Core reset detection and OVP 2 FB Sets the peak current setpoint 3 CS Current sense input and skip cycle level selection 4 GND 5 Drv 6 VCC 7 NC 8 HV The IC ground Driving pulses Supplies the IC − High−voltage pin Description The auxiliary FLYBACK signal ensures discontinuous operation and offers a fixed over.
a sampling time of 4.5 ms whereas it is 1.5 ms for the B version.
The NCP1377 also features an efficient protective circuitries which, in presence of an overcurrent condition, disables the output pulses and enters a safe burst mode, trying to restart. Once the default has gone, the device auto−recovers. Finally an internal 1.0 ms Soft−Start eliminates the traditional startup stress.
Features
• Free−Running Borderline/Critical Mode Quasi−Resonant Operation
• Latched Overvoltage Protection
• Auto−Recovery Short−Circuit Protection Via UVLO Crossover
• External Latch Triggering, e.g. Via Overtempe.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NCP137 |
ON Semiconductor |
Very Low Dropout Bias Rail CMOS Voltage Regulator | |
2 | NCP1377B |
ON Semiconductor |
PWM Current-Mode Controller | |
3 | NCP1378 |
ON Semiconductor |
PWM Current-Mode Controller | |
4 | NCP1379 |
ON Semiconductor |
Quasi-Resonant Current-Mode Controller | |
5 | NCP130 |
ON Semiconductor |
Very Low Dropout Bias Rail CMOS Voltage Regulator | |
6 | NCP1308 |
ON Semiconductor |
PWM Current Mode Controller | |
7 | NCP133 |
ON Semiconductor |
Very Low Dropout Bias Rail CMOS Voltage Regulator | |
8 | NCP1336A |
ON Semiconductor |
Quasi-Resonant PWM Controller | |
9 | NCP1336B |
ON Semiconductor |
Quasi-Resonant PWM Controller | |
10 | NCP1337 |
ON Semiconductor |
PWM Current Mode Controller | |
11 | NCP1338 |
ON Semiconductor |
PWM Controller | |
12 | NCP1339 |
ON Semiconductor |
QuasiResonant Controller |