Pin No. Pin Name Function 1 PFC VCC This pin provides the bias voltage to the PFC controller. 2 FB Feedback Signal Current Sense 3 CS/OVP 4 GND IC Ground 5 DRV Driver Output 6 VCC VCC Input 7 NC -- 8 HV High--Voltage Pin Description This pin is a direct connection to the VCC pin (Pin 6) via a low impedance switch. In standby and during the.
offered by the NCP1230A is an event management scheme that can disable the front--end PFC circuit during standby, thus reducing the no load power consumption. The NCP1230A itself goes into soft skipping at light loads while limiting peak current (to 25% of nominal peak) so that no acoustic noise is generated. The NCP1230A has a high--voltage startup circuit that eliminates external components and reduces power consumption. The NCP1230A also features an internal latching function that can be used for OVP protection. This latch is triggered by pulling the CS pin above 3.0 V and can only be reset.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NCP1230 |
ON Semiconductor |
Low Standby Power High Performance PWM Controller | |
2 | NCP1231 |
ON Semiconductor |
Low Standby Power High Performance PWM Controller | |
3 | NCP1232 |
ON |
Microprocessor Monitor | |
4 | NCP1234 |
ON Semiconductor |
Fixed Frequency Current Mode Controller | |
5 | NCP1235 |
ON Semiconductor |
Fixed Frequency Current Mode Controller | |
6 | NCP1236 |
ON Semiconductor |
Fixed Frequency Controller | |
7 | NCP1237 |
ON Semiconductor |
Fixed Frequency Current Mode Controller | |
8 | NCP1238 |
ON Semiconductor |
Fixed-Frequency Controller | |
9 | NCP1239 |
ON Semiconductor |
Fixed Frequency Current-Mode Controller | |
10 | NCP120 |
ON Semiconductor |
Very Low Dropout Bias Rail CMOS Voltage Regulator | |
11 | NCP1200 |
ON Semiconductor |
PWM Current-Mode Controller | |
12 | NCP1200A |
ON Semiconductor |
PWM Current-Mode Controller |