Pin Name Description 1 Skip/Latch This pin provides a latch input to permanently disable the device under a fault condition. It also allows the user to adjust the skip threshold. A resistor between this pin and GND provides noise immunity to the latch input and sets the skip threshold. The voltage on this pin is determined by the combination of the inter.
• Fixed−Frequency 65 kHz Current−Mode Operation with Ramp
Compensation
• Dynamic Self Supply Eliminates the Need for an Auxiliary Winding
• Timer−Based Fault Protection for Improved Overload Detection
• Cycle Skip Reduces Input Power in Standby Mode
• Latched Overload Protection
• Internal High Voltage Startup Circuit
• Accurate Current Limit Detector (±5%)
• Adjustable Skip Level
• Latch Input for Easy Implementation of Overvoltage and
Overtemperature Protection
• Frequency Modulation for Softened EMI Signature
• 500 mA/800 mA Peak Source/Sink Current Drive Capability
• Pin to Pin Compatible .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NCP121 |
ON Semiconductor |
Very Low Dropout Bias Rail CMOS Voltage Regulator | |
2 | NCP1212 |
ON |
Current Mode PWM Controller | |
3 | NCP1215 |
ON |
Low Cost Variable OFF Time Switched Mode Power Supply Controller | |
4 | NCP1215A |
ON Semiconductor |
Low Cost Variable OFF Time Switched Mode Power Supply Controller | |
5 | NCP1216 |
ON |
PWM Current-Mode Controller | |
6 | NCP1216A |
ON Semiconductor |
PWM Current-Mode Controller | |
7 | NCP1217 |
ON Semiconductor |
Enhanced PWM Current-Mode Controller | |
8 | NCP1217A |
ON Semiconductor |
Enhanced PWM Current-Mode Controller | |
9 | NCP1219 |
ON Semiconductor |
PWM Controller | |
10 | NCP120 |
ON Semiconductor |
Very Low Dropout Bias Rail CMOS Voltage Regulator | |
11 | NCP1200 |
ON Semiconductor |
PWM Current-Mode Controller | |
12 | NCP1200A |
ON Semiconductor |
PWM Current-Mode Controller |