Pin No. Pin Name Pin Description 1 VCC This pin is connected to an external auxiliary voltage and supplies the controller. When above a certain level, the part fully latches off. 2 FB Feedback input. Hooking an optocoupler collector to this pin will allow regulation. 3 CS This pin monitors the primary peak current but also offers a means to introduce.
include: a timer to detect an overload or a short−circuit event with auto−recovery or latch protection, and a built−in VCC overvoltage protection.
The switcher also provides a jittered 65 kHz or 100 kHz switching frequency to improve the EMI.
Features
• Built−in 650 V, 1 A MOSFET with RDS(on) of 8.6 W for NCP1124
• Built−in 650 V, 1.8 A MOSFET with RDS(on) of 5.4 W for NCP1126
• Built−in 650 V, 5.5 A MOSFET with RDS(on) of 2.1 W for NCP1129
• Fixed−Frequency 65 or 100 kHz Current Mode Control with
Adjustable Internal Ramp Compensation
• Adjustable Current Limit with External Resistor
• Frequen.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NCP112 |
ON Semiconductor |
Supervisory-IC | |
2 | NCP1124 |
ON Semiconductor |
High-Voltage Switcher | |
3 | NCP1126 |
ON Semiconductor |
High-Voltage Switcher | |
4 | NCP110 |
ON Semiconductor |
Low Noise and High PSRR Linear Regulator | |
5 | NCP1117 |
ON Semiconductor |
1.0A Low-Dropout Positive Fixed and Adjustable Voltage Regulators | |
6 | NCP1117I |
ON Semiconductor |
1.0A Low-Dropout Positive Fixed and Adjustable Voltage Regulators | |
7 | NCP1117LP |
ON Semiconductor |
1.0 A Low-Dropout Positive Fixed and Adjustable Voltage Regulators | |
8 | NCP1136 |
ON Semiconductor |
High Voltage Switcher | |
9 | NCP114 |
ON Semiconductor |
300mA CMOS Low Dropout Regulator | |
10 | NCP115 |
ON Semiconductor |
LDO Regulator | |
11 | NCP100 |
ON Semiconductor |
Sub 1.0V Precision Adjustable Shunt Regulator | |
12 | NCP1000 |
ON Semiconductor |
Integrated Off-Line Switching Regulator |