ENABLE (On/Off) The ENABLE (on/off) input allows external circuitry to put the NC converter into a low power dissipation (sleep) mode. Positive (active-high) ENABLE is available as standard. Positive ENABLE (active-high) units of the NC series are turned on if the ENABLE pin is high or floating. Pulling the pin low will turn off the unit. With the active hi.
High Efficiency: 91% @ 12Vin, 5V/15A out Size: 30.5x27.9x11.4mm (1.20”×1.10”×0.45”) -- Vertical 30.5x27.9x12.9mm (1.20”×1.10”×0.51”) -- Horizontal Voltage and resistor-based trim No minimum load required Output voltage programmable from 0.9Vdc to 5.0Vdc via external resistors Fixed frequency operation Input UVLO, output OCP, SCP Power good output signal Remote ON/OFF (default: Positive) ISO 9000, TL 9000, ISO 14001 certified manufacturing facility UL/cUL 60950 (US & Canada) Recognized, and TUV (EN60950) Certified Delphi NC15 Series Non-Isolated Point of Load DC/DC Power Modules: 12Vin, 0.9V-5.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NC12S0A0V06 |
Delta Electronics |
DC/DC Power Modul | |
2 | NC12S0A0V20 |
Delta Electronics |
DC/DC Power Modul | |
3 | NC12S0A0V30 |
Delta Electronics |
DC/DC Power Modul | |
4 | NC12S0A0V40 |
Delta Electronics |
DC/DC Power Modul | |
5 | NC12S0A0V60 |
Delta Electronics |
DC/DC Power Modul | |
6 | NC12S0A0H06 |
Delta Electronics |
DC/DC Power Modul | |
7 | NC12S0A0H15 |
Delta Electronics |
DC/DC Power Modul | |
8 | NC12S0A0H20 |
Delta Electronics |
DC/DC Power Modul | |
9 | NC101 |
Wireless Telecom |
Noise Diodes | |
10 | NC101 |
Noise Com |
(NC100 Series) 0.1 HZ - 500 KHZ Noise Diode | |
11 | NC102 |
Wireless Telecom |
Noise Diodes | |
12 | NC102 |
Noise Com |
(NC100 Series) 0.1 HZ - 500 KHZ Noise Diode |