The NB7VPQ702M is a 1.8 V dual channel re−driver for USB 3.1 Gen 1 and USB 3.1 Gen 2 applications that supports both 5 Gbps and 10 Gbps data rates. Signal integrity degrades from PCB traces, transmission cables, and inter−symbol interference (ISI). The NB7VPQ702M compensates for these losses by engaging varying levels of equalization at the input receiver. T.
an intelligent LFPS circuit. This senses the low frequency signals and automatically disables driver de−emphasis to meet full USB 3.1 Gen 1 and USB 3.1 Gen 2 compliances.
After power up, the NB7VPQ702M periodically checks both of the TX output pairs for a receiver connection. When the receiver is detected the RX termination becomes enabled and the NB7VPQ702M is set to perform the re−driver function.
The NB7VPQ702M comes in a small 3 x 3 mm UQFN16 package and is specified to operate across the entire industrial temperature range,
–40°C to 85°C.
Features
• 1.8 V ± 5% Power Supply
• Device Suppor.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | NB7VPQ701M |
ON Semiconductor |
1.8V USB 3.1 Single Channel Re-driver | |
2 | NB7VPQ16M |
ON Semiconductor |
1.8V/2.5V CML 12.5 Gbps Programmable Pre-Emphasis Copper/Cable Driver | |
3 | NB7V32M |
ON Semiconductor |
Clock Divider | |
4 | NB7V33M |
ON Semiconductor |
1.8V / 2.5V 10GHz Div By 4 Clock Divider | |
5 | NB7V52M |
ON Semiconductor |
1.8V / 2.5V Differential D Flip-Flop | |
6 | NB7V585M |
ON Semiconductor |
Differential1-to-6 CML clock/data distribution | |
7 | NB7V586M |
ON Semiconductor |
1.8V Differential 2:1 Mux Input to 1.2V/1.8V 1:6 CML Clock/Data Fanout Buffer / Translator | |
8 | NB7V58M |
ON Semiconductor |
1.8 V / 2.5 V / 3.3 V Differential 2:1 Clock / Data Multiplexer / Translator | |
9 | NB7V72M |
ON Semiconductor |
Differential 2 x 2 Crosspoint Switch | |
10 | NB7VQ1006M |
ON Semiconductor |
1.8V / 2.5V 10Gbps Equalizer Receiver | |
11 | NB7VQ14M |
ON Semiconductor |
a high performance differential 1:4 CML fanout buffer | |
12 | NB7VQ572M |
ON Semiconductor |
1.8V / 2.5V /3.3V Differential 4:1 Mux w/Input Equalizer to 1:2 CML Clock/Data Fanout / Translator |