The MXT2482SX is amonolithic synchronous buck regulator. The device integrates 150mΩ MOSFETS that provide 2A continuous load current over a wide operating input voltage of 4.5 to 23V. Current mode control provides fast transient response and cycle-by-cycle current limit. An adjustable soft-start prevents inrush current at turn-on. In shutdown mode, the suppl.
. . . . . . . . . . .
• 2-2.5A Output Current
• Wide 4.5-23V Operating Input Range
• Integrated 150mΩ Power MOSFET Switches
• Output Adjustable from from 0.925 to 20V
• Up to 95% Efficiency
• Programmable Soft-Start
• Stable with Low ESR Ceramic Output Capacitors
• Fixed 450KHz Frequency
• Cycle-by-Cycle Over Current Protection
• Input Under Voltage Lockout
• Thermally Enhanced 8-Pin SOIC/SOIC-E Package
APPLICATIONS
. . . . .
• Distributed Power Systems
• Networking Systems
• FPGA, DSP, ASIC Power Supplies
• Green Electronics/ Appliances
• Notebook Computers
1/1
Free Datasheet http://www.da.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MXT2482SX |
ETC |
450 kHz Synchronous Rectified Step-Down Converter | |
2 | MXT211 |
MXTronics |
Two-phase brushless DC motor driver | |
3 | mXT2113TG-AB |
Microchip |
Touchscreen Controller | |
4 | mXT2113TG-AT |
Microchip |
Touchscreen Controller | |
5 | MXT224 |
ATMEL Corporation |
maXTouch 224-channel Touchscreen Sensor | |
6 | mXT224E |
ATMEL |
maXTouch 224-channel Touchscreen Sensor | |
7 | MXT2303 |
MXTronics |
USB interface RS232 interface converter | |
8 | MXT2303HX |
Core Technology |
RS232 devices to the USB interface conversion | |
9 | mXT25C07 |
ATMEL |
224-channel Touchscreen Sensor | |
10 | MXT276 |
ETC |
2-phase brushless DC motor driver | |
11 | mXT2954T2 |
ATMEL |
maXTouch 2911-node Touchscreen Controller | |
12 | MXT1117 |
ETC |
Low Dropout Linear Regulator |