The MX25L6402 is a CMOS 67,108,864 bit serial MTP EEPROM, which is configured as 8,388,608 x 8 internally. The MX25L6402 features a serial peripheral interface and software protocol allowing operation on a simple 3- wire bus. The three bus signals are a clock input (SCLK), a serial data input (SI), and a serial data output (SO). SPI access to the device is e.
GENERAL
• 67,108,864 x 1 bit structure
• 128 Equal Sectors with 64K byte each - Any sector can be erased
• Single Power Supply Operation www.DataSheet4U.com - 3.0 to 3.6 volt for read, erase, and program operations
• Latch-up protected to 100mA from -1V to Vcc +1V
• Low Vcc write inhibit is equal to or less than 2.2V PERFORMANCE
• High Performance - Fast access time: 25MHz serial clock (50pF + 1TTL Load) - Fast program time: 4ms/page (typical, 128-byte per page) - Fast erase time: 3s/sector (typical, 64K-byte per sector) - Acceleration mode: - Program time: 3.2ms/page (typical) - Erase time: 2.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MX25L6402A |
Macronix International |
64M-BIT [x 1] CMOS SERIAL eLite FlashTM MEMORY | |
2 | MX25L6405 |
MACRONIX |
64M-BIT [x 1] CMOS SERIAL eLiteFlash MEMORY | |
3 | MX25L6405D |
Macronix International |
64M-BIT [x 1 / x 2] CMOS SERIAL FLASH | |
4 | MX25L6406E |
Macronix International |
64M-BIT [x 1 / x 2] CMOS SERIAL FLASH | |
5 | MX25L6408D |
MACRONIX |
FLASH MEMORY | |
6 | MX25L6408E |
MACRONIX |
64M-BIT [x 1 / x 2] CMOS SERIAL FLASH | |
7 | MX25L6433F |
MACRONIX |
64M-BIT CMOS MXSMIO FLASH MEMORY | |
8 | MX25L6435E |
MACRONIX |
64M-BIT [x 1/x 2/x 4] CMOS MXSMIO (SERIAL MULTI I/O) FLASH MEMORY | |
9 | MX25L6436E |
MACRONIX |
FLASH MEMORY | |
10 | MX25L6445E |
MACRONIX |
FLASH MEMORY | |
11 | MX25L6455E |
MACRONIX |
FLASH MEMORY | |
12 | MX25L6473E |
MACRONIX |
64M-BIT [x 1/x 2/x 4] CMOS MXSMIO (SERIAL MULTI I/O) FLASH MEMORY |