The MT5033 devices provide a power supply solution for products powered by either a one-cell Li-Ion or Li-polymer battery. The converter generates a stable output voltage that is either adjusted by an external resistor divider or fixed internally on the chip. It provides high efficient power conversion and is capable of delivering output currents up to 2.5A .
Synchronous Step-up Converter with 2.5A Output Current From 3V Input Wide VIN Range From 2.9V to 5.5V Input Under-voltage Lockout Protection Fixed and Adjustable Output Voltage Built-in Output Over-voltage Protection Light-Load Pulse Skip Mode Load Disconnect During Shutdown Output Short Circuit Protection Thermal Shutdown Protection Available in a SOP8_EP Packages APPLICATIONS Power Bank USB Charging Port (5V) DC/DC Micro Modules 3V to 5V Input L1 1.5uH C1 10uF SW VIN EN GND MT5033 VOUT R3 FB R4 C2 C3 10uF 10uF 5V output up to 2.5A PGND Figure 1. MT5033 Typical Application Circuit .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MT5030 |
M3TEK |
95% Efficient 1.2MHz Synchronous Step-up Converter | |
2 | MT5032 |
M3TEK |
800kHz Synchronous Step-up Converter | |
3 | MT5004A |
MCC |
Three Phase Bridge Rectifier | |
4 | MT5006A |
MCC |
Three Phase Bridge Rectifier | |
5 | MT5008A |
MCC |
Three Phase Bridge Rectifier | |
6 | MT5010A |
MCC |
Three Phase Bridge Rectifier | |
7 | MT5012A |
MCC |
Three Phase Bridge Rectifier | |
8 | MT5014A |
MCC |
Three Phase Bridge Rectifier | |
9 | MT5016A |
MCC |
Three Phase Bridge Rectifier | |
10 | MT5060 |
MOS-TECH |
N-Channel Power MOSFET | |
11 | MT5060A |
MOS-TECH |
N-Channel Power MOSFET | |
12 | MT506MV5 |
ETC |
Human Machine Interface |