The MSC7166 is a driver IC designed to directly drive the grids of a vacuum fluorescent display tube. Since this IC has a built-in 4 to 16-line decoder and 16 output circuits, a signal device of MSC7166 can replace a set of the following three: two devices of either MSL912 or MSL918 and one device of either MSM4514 or MSM74HC4514. Setting the DUTY pin to the.
• Logic supply voltage : 5V
• Driver supply voltage : 65V
• Driver output current IOH :
–40 mA IOL : 1 mA
• Can be directly connected to VF display tube without pull-down resistor
• Built-in 4- to 16-line decoder
• Brightness can be adjusted by DUTY pin
• Package 24-pin plastic SOP (SOP24-P-430-1.27-K) (Product name: MSC7166GS-K)
1/8
¡ Semiconductor
MSC7166
BLOCK DIAGRAM
V DISP(+) V DD S 1 S 2 S 3 SEL0 S 4 S 5 SEL1 SEL2 4 to 16 DECODER SEL3 S10 S11 S12 S13 S14 S15 S16 DUTY V SS S 8 S 9 S 6 S 7 GRID 1 GRID 2 GRID 3 GRID 4 GRID 5 GRID 6 GRID 7 GRID 8 GRID 9 GRID10 GRID11 GRID12 GRID13 GRID1.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MSC7165 |
OKI electronic componets |
16-Bit Grid Driver with 4 to 16-Decoder | |
2 | MSC7110 |
Freescale Semiconductor |
Low-Cost 16-Bit DSP | |
3 | MSC7110-01 |
OKI electronic componets |
12-Segment x 16-Digit or 16-Segment x12-Digit Display Controller/Driver | |
4 | MSC7112-01 |
OKI electronic componets |
12-Segment x 16-Digit or 16-Segment x12-Digit Display Controller/Driver | |
5 | MSC7113 |
Motorola Semiconductor |
Low-Cost 16-bit DSP | |
6 | MSC7115 |
NXP |
Low-Cost 16-bit DSP | |
7 | MSC7116 |
Freescale Semiconductor |
Low-Cost 16-bit DSP | |
8 | MSC7119 |
Freescale Semiconductor |
Low-Cost 16-bit DSP | |
9 | MSC7128-xx |
OKI electronic componets |
5 x 7-Dot Character x 16-Digit Display Controller/Driver | |
10 | MSC70SM120JCU3 |
Microsemi |
Buck Chopper SiC MOSFET | |
11 | MSC72143 |
ASI |
NPN SILICON RF POWER TRANSISTOR | |
12 | MSC72166 |
ASI |
NPN SILICON RF POWER TRANSISTOR |