in MPC7447A RISC Microprocessor Hardware Specifications, Section 1.9.1, “PLL Configuration,” for valid PLL_CFG[0:4] settings. 2. Caution: If dynamic frequency switching (DFS) is enabled, the SYSCLK frequency and PLL_CFG[0:4] settings must be chosen such that the resulting processor frequency is greater than or equal to the minimum core frequency. 1.5.2.2 P.
Freescale Semiconductor, Inc.
1.2
•
Features
Power management — 1.1-V processor core
This section summarizes changes to the features of the MPC7447A described in the MPC7447A RISC Microprocessor Hardware Specifications.
1.4
•
General Parameters
Core power supply: 1.1 V ± 50 mV DC nominal
1.5.1
DC Electrical Characteristics
Table 4. Recommended Operating Conditions 1
Characteristic Symbol VDD AVDD Recommended Value 1.1 V ± 50 mV 1.1 V ± 50 mV Unit V V 2 Notes
Freescale Semiconductor, Inc...
Table 4 provides the recommended operating conditions for the MPC7447A part numbers described h.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MPC7445 |
Freescale Semiconductor |
RISC Microprocessor Hardware Specifications | |
2 | MPC7448 |
Motorola Semiconductor |
RISC Microprocessor | |
3 | MPC74 |
Allen |
(MPC70 - MPC74) Metal Plate Cement Resistors | |
4 | MPC74 |
Futaba Electric |
(MPC Series) Metal Plate Cement Resistor | |
5 | MPC7400 |
NXP |
RISC Microprocessor Reference Manual | |
6 | MPC7410 |
NXP |
RISC Microprocessor Reference Manual | |
7 | MPC7410 |
Freescale Semiconductor |
RISC Microprocessor | |
8 | MPC7450 |
Motorola |
Micricontroller | |
9 | MPC7455 |
Freescale Semiconductor |
RISC Microprocessor | |
10 | MPC7457 |
NXP |
RISC Microprocessor | |
11 | MPC7457 |
Motorola |
Microcontroller | |
12 | MPC7457EC |
NXP |
RISC Microprocessor |