The MP3202 is a step-up converter designed for driving up to 39 white LEDs (13 strings of 3 LEDs each) from a 5V system rail. The MP3202 uses a current mode, fixed frequency architecture to regulate the LED current, which is measured through an external current sense resistor. Its low 104mV feedback voltage reduces power loss and improves efficiency. The OV .
• 2.5V to 6V Input Voltage Range
• On Board Power MOSFET
• Drives up to 39 White LEDs at 5V Input
• Up to 92% Efficiency
• Over 1MHz Fixed Switching Frequency
• Open Load Shutdown
• Low 104mV Feedback Voltage
• Soft-Start/PWM Dimming
• UVLO, Thermal Shutdown
• Internal 1.3A Current Limit
• Available in TSOT23-6 and QFN8 Packages
APPLICATIONS
• Cell Phones
• Handheld Computers and PDAs
• Digital Still Cameras
• Small LCD Displays
“MPS” and “The Future of Analog IC Technology” are Registered Trademarks of Monolithic Power Systems, Inc.
TYPICAL APPLICATION
VIN 4.5V - 6V
IN
SW
EN
EN MP3202 OV.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MP3204 |
MPS |
1.3MHz Fixed Frequency 5-White LED Driver | |
2 | MP320A |
CTS |
Low Cost Quartz Crystal | |
3 | MP320A-E |
CTS |
Low Cost Quartz Crystal | |
4 | MP320B |
CTS |
Low Cost Quartz Crystal | |
5 | MP320B-E |
CTS |
Low Cost Quartz Crystal | |
6 | MP3213 |
MPS |
700KHz/1.3MHz Boost Converter | |
7 | MP3274 |
Exar |
12-Bit Data Acquisition Subsystem | |
8 | MP3275 |
Exar |
12-Bit Data Acquisition Subsystem | |
9 | MP3276 |
Exar |
12-Bit Data Acquisition Subsystem | |
10 | MP327B |
CTS |
Low Cost Quartz Crystal | |
11 | MP327B-E |
CTS |
Low Cost Quartz Crystal | |
12 | MP30 |
Vishay Siliconix |
Power Rheostats |