The MP28162 is a high-efficiency, low quiescent current (IQ), buck-boost converter that operates from an input voltage (VIN) exceeding, below, or equal to the output voltage (VOUT). The device provides a compact solution for products powered by single-cell Li-ion or multicell alkaline batteries, where VOUT is within the battery voltage (VBATT) range. Current.
• 1.8V Minimum Start-Up Input Voltage (VIN)
• 1.2V to 5.5V Operating VIN Range
• 1.5V to 5.5V Output Voltage (VOUT) Range
• 1.5A Switching Current Limit
• 2MHz Fixed Switching Frequency (fREQ) or
External Synchronous fREQ
• Selectable Pulse-Skip Mode or Pulse-Width
Modulation (PWM) Mode
• 25μA Typical Quiescent Current (IQ)
• Load Disconnect during Shutdown
• Internal Soft Start (SS) and Compensation
• Short-Circuit Protection (SCP) with Hiccup
Mode
• Over-Temperature Protection (OTP)
• Available in a Small WLCSP-15
(1.3mmx2.1mm) Package
Optimized Performance with MPS Inductor MPL-AT2010 Serie.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MP28167-A |
MPS |
Integrated Buck-Boost Converter | |
2 | MP2810 |
M-Pulse Microwave |
General Purpose Schottky Diodes | |
3 | MP28100BT |
ETC |
MP28100BT | |
4 | MP2811 |
M-Pulse Microwave |
General Purpose Schottky Diodes | |
5 | MP2800 |
M-Pulse Microwave |
General Purpose Schottky Diodes | |
6 | MP2801 |
M-Pulse Microwave |
General Purpose Schottky Diodes | |
7 | MP2822K3C10 |
ETC |
Safety Standard Capacitor | |
8 | MP2823K3C30 |
ETC |
Safety Standard Capacitor | |
9 | MP2823K3D10 |
ETC |
Safety Standard Capacitor | |
10 | MP2824K3E60 |
ETC |
Safety Standard Capacitor | |
11 | MP2824K3F10 |
ETC |
Safety Standard Capacitor | |
12 | MP28251 |
MPS |
4A Synchronous Step-Down Converter |