The Microchip Technology Inc. MCP6S91/2/3 are analog Programmable Gain Amplifiers (PGAs). They can be configured for gains from +1 V/V to +32 V/V and the input multiplexer can select one of up to two channels through a SPI port. The serial interface can also put the PGA into shutdown to conserve power. These PGAs are optimized for high-speed, low offset volt.
• Multiplexed Inputs: 1 or 2 channels
• 8 Gain Selections:
- +1, +2, +4, +5, +8, +10, +16 or +32 V/V
• Serial Peripheral Interface (SPI™)
• Rail-to-Rail Input and Output
• Low Gain Error: ±1% (max.)
• Offset Mismatch Between Channels: 0 µV
• High Bandwidth: 1 to 18 MHz (typ.)
• Low Noise: 10 nV/√Hz @ 10 kHz (typ.)
• Low Supply Current: 1.0 mA (typ.)
• Single Supply: 2.5V to 5.5V
• Extended Temperature Range: -40°C to +125°C
Typical Applications
• A/D Converter Driver
• Multiplexed Analog Applications
• Data Acquisition
• Industrial Instrumentation
• Test Equipment
• Medical Instrumentation
B.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MCP6S92 |
Microchip Technology |
Programmable Gain Amplifiers | |
2 | MCP6S93 |
Microchip Technology |
Programmable Gain Amplifiers | |
3 | MCP6S21 |
Microchip Technology |
analog Programmable Gain Amplifiers | |
4 | MCP6S22 |
Microchip Technology |
analog Programmable Gain Amplifiers | |
5 | MCP6S26 |
Microchip Technology |
analog Programmable Gain Amplifiers | |
6 | MCP6S28 |
Microchip Technology |
analog Programmable Gain Amplifiers | |
7 | MCP6001 |
Microchip |
Low-Power Op Amp | |
8 | MCP6001R |
Microchip Technology |
Low-Power Op Amp | |
9 | MCP6001U |
Microchip Technology |
Low-Power Op Amp | |
10 | MCP6002 |
Microchip |
Low-Power Op Amp | |
11 | MCP601 |
Microchip |
2.7V to 6.0V Single Supply CMOS Op Amps | |
12 | MCP601R |
Microchip Technology |
2.7V to 6.0V Single Supply CMOS Op Amps |