of each pin can be found in the Functional pin description. Table 2. 33910 pin definitions Pin Pin name Formal name Definition 1 RXD Receiver Output This pin is the receiver output of the LIN interface which reports the state of the bus voltage to the MCU interface. 2 TXD Transmitter Input This pin is the transmitter input of the LIN interface wh.
The device provides full SPI readable diagnostics and a selectable timing watchdog for detecting errant operation. The LIN Protocol Specification 2.0 and 2.1 compliant LIN transceiver has waveshaping circuitry which can be disabled for higher data rates. Two 50 mA/60 mA high-side switches with optional pulse-width modulated (PWM) are implemented to drive small loads. One high voltage input is available for use in contact monitoring, or as external wake-up input. This input can be used as high voltage Analog Input. The voltage on this pin is divided by a selectable ratio and available via an a.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MC33911 |
NXP |
LIN transceiver | |
2 | MC33912 |
Freescale Semiconductor |
LIN transceiver | |
3 | MC33901 |
Freescale Semiconductor |
High-speed CAN Transceiver | |
4 | MC33902 |
Motorola |
High Speed CAN Interface | |
5 | MC33903 |
NXP |
SBC Gen2 | |
6 | MC33904 |
NXP |
SBC Gen2 | |
7 | MC33905 |
NXP |
SBC Gen2 | |
8 | MC33907 |
NXP |
Power-system | |
9 | MC33908 |
NXP |
Power-system | |
10 | MC3392 |
Motorola |
LOW SIDE PROTECTED SWITCH | |
11 | MC33926 |
Freescale Semiconductor |
5.0A Throttle Control H-Bridge | |
12 | MC33926 |
NXP |
5.0A throttle control H-bridge |