of many of these terminals can be found in the System/Application Information section beginning on page 19. Terminal 1 Terminal Name FS Formal Name Fault Status (Active Low) Positive Power Supply Low-Side Output 4 Low-Side Output 6 Low-Side Output 8 Low-Side Output 10 Ground Low-Side Output 5 Low-Side Output 7 Low-Side Output 9 Low-Side Output 11 Digital D.
Programming, control, and diagnostics are accomplished using a 16-bit SPI interface. Additionally, each high-side output has its own parallel input for pulse-width modulation (PWM) control if desired. The low sides share a single configurable direct input. The 33888 is available in two power packages. Features
• Dual 10 mΩ High Side, Dual 40 mΩ High Side, Octal 600 mΩ Low Side
• Full Operating Voltage of 6.0 V to 27 V
• SPI Control of High-Side Overcurrent Limit, High Side Current Sense, Output OFF Open Load Detection, Output ON/OFF Control, Watchdog Timeout
• SPI Reporting of Program Status .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MC33888 |
Motorola |
Quad High-Side and Octal Low-Side Switch for Automotive | |
2 | MC33880 |
Motorola |
CONFIGURABLE OCTAL SERIAL SWITCH WITH SERIAL PERIPHERAL INTERFACE | |
3 | MC33882 |
NXP |
Six Output Low-side Switch | |
4 | MC33882 |
Motorola |
Six-Output Low-Side Switch | |
5 | MC33883 |
Motorola |
H-Bridge Gate Driver | |
6 | MC33883 |
NXP |
H-Bridge Gate Driver | |
7 | MC33884 |
Motorola |
SWITCH MONITOR INTERFACE | |
8 | MC33886 |
Motorola |
5.0A H-BRIDGE | |
9 | MC33887 |
NXP |
5.0A H-Bridge with Load Current Feedback | |
10 | MC33887 |
Motorola |
5.0 A H-Bridge with Load Current Feedback | |
11 | MC33889 |
Motorola |
System Base Chip - Lite With Low Speed CAN | |
12 | MC33889 |
NXP |
System basis chip |