The MB87030 SCSI Protocol Controller (SPC) isa CMOS LSI circuit specifically designed to control a Small Computer Systems Interface (SCSI). The SPC can serve as either an Initiator or Target for the SCSI; thus, it can be used as an I/O controller or as a host adapter. To use the device in the most effective manner, it is recommended that the user be thorough.
• Independent data transfer bus for CPU and DMA controller
• Full support for SCSI control
• Serves as either Initiator or Target device
• Synchronous mode transfer with a programmable offset of
up to eight bytes
• In synchronous mode, data transfer speed programmable at four rates
• Data transfer rates of up to 4 megabytes per second
• Eight-byte data buffer register
• 24-bit transfer byte counter
• Compatible with single-ended and/or differential alternative for SCSI
• Single +5V supply
• Low power dissipation
• TTL-compatible I/O
• 88-Pin Ceramic Repeated Quad-In-Line Package
PGA-88C-A01
T.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MB87001A |
Fujitsu |
CMOS PLL FREQUENCY SYNTHESIZER | |
2 | MB87002 |
Fujitsu |
1200 Bps MSK Modem | |
3 | MB87006A |
Fujitsu |
CMOS Serial Input Phase Locked Loop (PLL) | |
4 | MB87014A |
Fujitsu |
CMOS PLL Frequency Synthesizer | |
5 | MB87020 |
Fujitsu |
16 Bit A/D and D/A Converter | |
6 | MB87029 |
Fujitsu |
DTMF Pulse Dialer | |
7 | MB87064 |
Fujitsu |
Digital Signal Processor | |
8 | MB87067 |
Fujitsu |
ADPCM Digital Signal Processor | |
9 | MB87068 |
Fujitsu |
ADPCM Digital Signal Processor | |
10 | MB87069 |
Fujitsu |
Serial Interface Adapter | |
11 | MB87073 |
Fujitsu |
CMOS PLL Frequency Synthesizer | |
12 | MB87076 |
Fujitsu |
CMOS PLL Frequency Synthesizer |