The MB39A114 is a DC/DC converter IC of pulse width modulation (PWM) type for charging, capable of independently controlling the output voltage and output current. It is suitable for down conversion. MB39A114 can dynamically control the secondary battery’s charge current by detecting a voltage drop in an AC adapter to keep its power constant (dynamically-con.
• Built-in constant current control circuit in 2-system.
• Analog control of charge current value is possible. (+INE1 terminal and +INE2 terminal)
• Built-in AC adapter detection function (When VCC is lower than the battery voltage +0.2 V, output is fixed in the off.)
• Constant voltage control state detection function (CVM terminal) enables prevention of mis-detection for full
charge.
• Built-in overvoltage detection function (OVP terminal) of charge voltage
(Continued)
■ PACKAGE
24-pin plastic SSOP
(FPT-24P-M03)
Copyright©2004-2008 FUJITSU MICROELECTRONICS LIMITED All rights reserved 2004.5.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MB39A110 |
Fujitsu |
4-Channel DC/DC Converter IC | |
2 | MB39A112 |
Fujitsu |
3-Channel DC/DC Converter IC | |
3 | MB39A112 |
Cypress |
3-ch DC/DC Converter IC | |
4 | MB39A113 |
Fujitsu |
DC/DC Converter IC | |
5 | MB39A115 |
Fujitsu Media Devices Limited |
5 ch DC/DC Converter IC with Synchronous Rectification | |
6 | MB39A119 |
Fujitsu |
DC/DC Converter IC | |
7 | MB39A102 |
Fujitsu |
4-Channel DC/DC Converter IC | |
8 | MB39A103 |
Fujitsu |
4-Channel DC/DC Converter IC | |
9 | MB39A104 |
Fujitsu |
2-Channel DC/DC Converter IC | |
10 | MB39A105 |
Fujitsu |
1-Channel DC/DC Converter IC | |
11 | MB39A106 |
Fujitsu |
2-Channel DC/DC Converter IC | |
12 | MB39A107 |
Fujitsu |
DC/DC Converter IC |