When data is written to or read from flash memory, it requires that the voltage at its power supply (VPP) be switched (to 12 V for writing and to 3.3 or 5.0 V for reading). The MB3807A is a power management switching IC, designed to be compatible with the PCMCIA digital controller, to switch the VPP voltage of flash memory. When the switch is turned on, opti.
• Switching at low ON resistance For writing data: SWIN1 = 12 V, Ron = 0.3 Ω For reading data: SWIN2 = 5 V, Ron = 6.0 Ω SWIN2 = 3.3 V, Ron = 8.5 Ω
• Wide range of supply voltages: VCC = 2.7 to 5.5 V
• Prevention of reverse current from the load at switch-off time
• ON time controllable with external pin
• Break-before-make operation
s PACKAGE
16 pin Plastic SOP
(FPT-16P-M04)
MB3807A
s PIN ASSIGNMENT
(TOP VIEW) EN1A EN0A SWIN2A SWIN1A SWIN1B SWIN2B EN0B GND 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9
VCC DLYA SWOUTA SWOUTA SWOUTB SWOUTB DLYB EN1B
(FPT-16P-M04)
s LOGICAL OPERATION TABLE
EN1 0 .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MB3800 |
Fujitsu Media Devices |
Switching Regulator Controller | |
2 | MB3802 |
Fujitsu Media Devices |
Power Management Switch | |
3 | MB3813A |
Fujitsu Media Devices |
Lithium Ion Battery Charger DC/DC Converter | |
4 | MB3817 |
Fujitsu Media Devices |
Switching Regulator Controller | |
5 | MB3821 |
Fujitsu Media Devices |
2-ch DC/DC Converter | |
6 | MB3825A |
Fujitsu Media Devices |
6-ch DC/DC Converter | |
7 | MB3827 |
Fujitsu Media Devices |
6-ch DC/DC Converter | |
8 | MB3828 |
Fujitsu Media Devices |
Pentium DC/DC Converter | |
9 | MB3829 |
Fujitsu Media Devices |
System Power Supply | |
10 | MB3832A |
Fujitsu Media Devices |
DC/DC Converter | |
11 | MB3833A |
Fujitsu Media Devices |
Lithium Ion Battery Charger DC/DC Converter | |
12 | MB3836 |
Fujitsu |
Li-lon Battery Protection |