MB1000 - MaxBotix

MB1000 High Performance Sonar Range Finder

Pin 1-BW-*Leave open or hold low for serial output on the TX output. When BW pin is held high the TX output sends a pulse (instead of serial data), suitable for low noise chaining. Pin 2-PW- This pin outputs a pulse width representation of range. The distance can be calculated using the scale factor of 147uS per inch. Pin 3-AN- Outputs analog voltage with a .

Features

 Continuously variable gain for control and side lobe suppression
 Object detection to zero range objects
 2.5V to 5.5V supply with 2mA typical current draw
 Readings can occur up to every 50mS, (20-Hz rate)
 Free run operation can continually measure and output range information
 Triggered operation provides the range reading as desired
 Interfaces are active simultaneously
 Serial, 0 to Vcc, 9600 Baud, 81N
 Analog, (Vcc/512) / inch
 Pulse width, (147uS/inch)
 Learns ringdown pattern when commanded to start ranging
 Designed for protected indoor environments
 Sensor operates at .