The MAX710/MAX711 integrate a step-up DC-DC converter with a linear regulator to provide step-up/down voltage conversion. They are optimized for battery applications where the input varies above and below the regulated output voltage. They have an input range from +1.8V to +11V. Typical efficiency when boosting battery inputs is 85%. The MAX710/MAX711 can be.
o Step-Up/Down Voltage Conversion o +1.8V to +11V Input Range o Output: 5V/250mA at VIN = 1.8V 5V/500mA at VIN = 3.6V o No External FETs Required o Load Disconnected from Input in Shutdown o Battery Drain: 200µA No-Load (VIN = 4V) 7µA in Standby 0.2µA when Off o Low-Noise and High-Efficiency Modes ______________Ordering Information PART MAX710C/D MAX710ESE MAX711C/D MAX711ESE TEMP. RANGE 0°C to +70°C -40°C to +85°C 0°C to +70°C -40°C to +85°C PIN-PACKAGE Dice 16 Narrow SO Dice 16 Narrow SO __________TypiFcuanl cOtpioenraaltiDngiaCgriracmusit __________________Pin Configuration +1.8V TO +.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MAX71020 |
Maxim |
Single-Chip Electricity Meter AFE | |
2 | MAX71020A |
Silergy |
Energy Measurement AFE | |
3 | MAX71020A |
Maxim Integrated |
Energy Measurement AFE | |
4 | MAX71071 |
Silergy |
Dual-Channel Isolated Metrology ADCs | |
5 | MAX71071 |
Maxim Integrated |
Dual-Channel Isolated Metrology ADCs | |
6 | MAX71071H |
Maxim Integrated |
Dual-Channel Isolated Metrology ADCs | |
7 | MAX711 |
Maxim |
3.3V/5V or Adjustable / Step-Up/Down DC-DC Converters | |
8 | MAX712 |
Maxim |
NiCd/NiMH Battery Fast-Charge Controllers | |
9 | MAX7126 |
Maxim Integrated |
Digit A/D Converter | |
10 | MAX7129 |
Maxim |
4-1/2 Digit Single-Chip A/D Converter with LCD Driver | |
11 | MAX713 |
Maxim Integrated |
NiCd/NiMH Battery Fast-Charge Controllers | |
12 | MAX71313L |
Silergy |
Single-Phase Electricity Meter SoC |