The MAX6400–MAX6405 is a family of ultra-low power microprocessor (µP) supervisory circuits used for monitoring battery, power-supply, and regulated system voltages. Each device contains a precision bandgap reference comparator and is trimmed to specified trip threshold voltages. These devices provide excellent circuit reliability and low cost by eliminating.
o Ultra-Small 4-Bump (2 ✕ 2) Chip-Scale Package, (Package Pending Full Qualification—Expected Completion Date 6/30/01. See UCSP Reliability Section for More Details.) o 70% Smaller Than SC70 Package o Ultra-Low 500nA (typ) Supply Current (MAX6400/MAX6401/MAX6402) o Factory-Trimmed Reset Thresholds from 2.20V to 4.63V in Approximately 100mV Increments o ±2.5% Threshold Accuracy -40°C to +85°C o Factory-Set 100ms (min) Reset Timeout Period o Manual Reset Input o Guaranteed Reset Valid to VCC = 1.0V o Three Reset Output Logic Options: Active-Low Push-Pull, Active-High Push-Pull, and Active-Low Op.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MAX640 |
Maxim |
5V/3.3V/3V/Adjustable / High-Efficiency / Low IQ / Step-Down DC-DC Converters | |
2 | MAX6401 |
Maxim |
P Supervisory Circuits in 4-Bump (2 x 2) Chip-Scale Package | |
3 | MAX6402 |
Maxim |
P Supervisory Circuits in 4-Bump (2 x 2) Chip-Scale Package | |
4 | MAX6403 |
Maxim |
P Supervisory Circuits in 4-Bump (2 x 2) Chip-Scale Package | |
5 | MAX6404 |
Maxim |
P Supervisory Circuits in 4-Bump (2 x 2) Chip-Scale Package | |
6 | MAX6405 |
Maxim |
P Supervisory Circuits in 4-Bump (2 x 2) Chip-Scale Package | |
7 | MAX6406 |
Maxim Integrated Products |
Voltage Detectors | |
8 | MAX6407 |
Maxim Integrated Products |
Voltage Detectors | |
9 | MAX6408 |
Maxim Integrated Products |
Voltage Detectors | |
10 | MAX6409 |
Maxim Integrated Products |
Voltage Detectors | |
11 | MAX641 |
Maxim |
Fixed Output 10W CMOS Step-Up Switching Regulators | |
12 | MAX6410 |
Maxim Integrated Products |
Voltage Detectors |