The MAX5972A provides a complete interface for a powered device (PD) to comply with the IEEE® 802.3af/ at standard in a power-over-Ethernet (PoE) system. The MAX5972A provides the PD with a detection signature, classification signature, and an integrated isolation power switch with inrush current control. During the inrush period, the MAX5972A limits the cur.
an input UVLO with wide hysteresis and long deglitch time to compensate for twisted-pair cable resistive drop and to assure glitch-free transition during power-on/-off conditions. The MAX5972A can withstand up to 100V at the input. The MAX5972A supports a 2-event classification method as specified in the IEEE 802.3at standard and provides a signal to indicate when probed by Type 2 power-sourcing equipment (PSE). The device detects the presence of a wall adapter power-source connection and allows a smooth switch over from the PoE power source to the wall power adapter. The MAX5972A also provide.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MAX5971A |
Maxim Integrated Products |
Single-Port 40W IEEE 802.3af/at PSE Controller with Integrated MOSFET | |
2 | MAX5971B |
Maxim Integrated Products |
PSE Controller | |
3 | MAX5973 |
Maxim Integrated Products |
Phase Redundancy Power Supervisor | |
4 | MAX5974A |
Maxim Integrated Products |
Current-Mode PWM Controllers | |
5 | MAX5974B |
Maxim Integrated Products |
Current-Mode PWM Controllers | |
6 | MAX5974C |
Maxim Integrated Products |
Current-Mode PWM Controllers | |
7 | MAX5974D |
Maxim Integrated Products |
Current-Mode PWM Controllers | |
8 | MAX5976A |
Maxim Integrated |
Hot-Swap Solution | |
9 | MAX5976B |
Maxim Integrated |
Hot-Swap Solution | |
10 | MAX5977A |
Maxim Integrated Products |
1V to 16V / Single-Channel Hot-Swap Controllers | |
11 | MAX5977B |
Maxim Integrated Products |
1V to 16V / Single-Channel Hot-Swap Controllers | |
12 | MAX5978 |
Maxim Integrated Products |
Hot-Swap Controller |