The MAX5910/MAX5917 are fully integrated hot-swap switches for positive supply rails. These devices allow the safe insertion and removal of circuit cards into live backplanes or ports without causing glitches on the backplane power-supply rail. They also monitor various circuit parameters and disconnect the load if a fault condition occurs, alerting the host.
that prevent damage to the internal FET. They include an enable input, which responds to positive logic signals (+3.3V or +5V), allowing the host system to disconnect the load. The MAX5910/MAX5917 Simple Swapper™ hot-swap ICs monitor four parameters for fault conditions: undervoltage lockout (UVLO), power-not-good, zero-current detection, and thermal shutdown. These devices are available in the extended temperature range, -40°C to +85°C. The MAX5910 comes in an 8-pin SO package and the MAX5917A/B is available in a 16-pin SO package. Features o Provides Safe Hot Swap for +10V to +65V Power Sup.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MAX5911 |
Maxim |
-48V Simple Swapper Hot-Swap Switches | |
2 | MAX5912 |
Maxim Integrated |
-48V Simple Swapper Hot-Swap Switches | |
3 | MAX5913 |
Maxim |
+48V Quad Hot-Swap Controllers | |
4 | MAX5913A |
Maxim Integrated Products |
+48V Quad Hot-Swap Controllers | |
5 | MAX5914 |
Maxim Integrated |
+48V Quad Hot-Swap Controllers | |
6 | MAX5914A |
Maxim Integrated Products |
+48V Quad Hot-Swap Controllers | |
7 | MAX5915 |
Maxim |
Dual PCI 2.2 Hot-Swap Controllers | |
8 | MAX5915A |
Maxim Integrated |
Dual PCI 2.2 Hot-Swap Controllers | |
9 | MAX5916 |
Maxim Integrated |
Dual PCI 2.2 Hot-Swap Controllers | |
10 | MAX5916A |
Maxim Integrated |
Dual PCI 2.2 Hot-Swap Controllers | |
11 | MAX5917 |
Maxim Integrated |
+65V Simple Swapper Hot-Swap Switches | |
12 | MAX5918 |
Maxim |
Low-Voltage / Dual Hot-Swap Controllers |