The MAX5079 ORing MOSFET controller replaces ORing diodes in high-reliability redundant, parallel-connected power supplies. Despite their low forward-voltage drop, ORing Schottky diodes cause excessive power dissipation at high currents. The MAX5079 allows for the use of low-on-resistance n-channel power MOSFETs to replace the Schottky diodes. This results i.
include an OVP flag to facilitate shutdown of a failed power supply due to an overvoltage condition, and a PGOOD signal that indicates if VIN is either below the undervoltage lockout or VBUS is in an overvoltage condition. The MAX5079 operates over the -40°C to +85°C temperature range and is available in a space-saving 14-pin TSSOP package. ♦ 2.75V to 13.2V Input ORing Voltage ♦ 1V to 13.2V Input ORing Voltage with 2.75V Aux Voltage Present ♦ 2A MOSFET Gate Pulldown Current During Fault Condition ♦ Ultra-Fast 200ns, MOSFET Turn-Off During Fault Condition ♦ Supply Undervoltage and Bus Overvolta.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | MAX507 |
Maxim |
Voltage-Output / 12-Bit DACs with Internal Reference | |
2 | MAX5070 |
Maxim Integrated Products |
(MAX5070 / MAX5071) Current-Mode PWM Controllers | |
3 | MAX5071 |
Maxim Integrated Products |
(MAX5070 / MAX5071) Current-Mode PWM Controllers | |
4 | MAX5072 |
Maxim Integrated Products |
Dual-Output Buck or Boost Converter | |
5 | MAX5073 |
Maxim Integrated Products |
Dual-Output Buck or Boost Converter | |
6 | MAX5074 |
Maxim Integrated Products |
Power IC with Integrated MOSFETs | |
7 | MAX5075 |
Maxim Integrated Products |
Push-Pull FET Driver | |
8 | MAX5077 |
Maxim Integrated Products |
Push-Pull FET Driver | |
9 | MAX5078 |
Maxim Integrated Products |
MOSFET Driver | |
10 | MAX500 |
Maxim |
CMOS / Quad / Serial-Interface 8-Bit DAC | |
11 | MAX5003 |
Maxim |
High-Voltage PWM Power-Supply Controller | |
12 | MAX501 |
Maxim |
Voltage-Output / 12-Bit Multiplying DACs |